How to Clone Tricore ECU with FoxFlash/KT200 Tool?

FoxFlash & KT200 Programmer can support cloning ECU function as OBDSTAR DC706. This is an introduction on how to clone Tricore ECU with new KT200 software step by step. The procedure may apply to FoxFlash software as well.

Step1. Read ECU data via "BOOT MODE TRICORE" or "BENCH TRICORE" option. Including Micro FLASH, EEPROM data from original ECU & new ECU.

Step2. Select Menu >> Select Drive >> TOOL BOOT >> TOOLS BOOT MODE - INFINEON TRICORE Clone Service >> ECU Model

Step3. Fill 1st option with original ECU Micro file, fill 2nd option with new ECU Micro file.

Step4. Click "CLONE & SAVE" to save new ECU file.

Step5. Select BOOT MODE >> INFINION TRICORE Boot >> ECU Model >> Load new ECU file >> Write to new ECU

* BENCH TRICORE may cause incomplete writing of ECU data(Boot is recommended)

Attention

1. Please write the original EEPROM to new ECU with no changes;

2. Please write Micro FLASH & EEPROM data separately, CANNOT read & write together;

3. If the Micro FLASH data cannot be written, it needs to be processed manually with winols. Or asking help for a professional engineer.

4. Nonsupport VW 5th generation IMMO system.

Technical Support

www.obd2shop.co.uk

How to use foxFlash tool to read ECU outdoors

This post will guide you on how to use foxFlash ECU programmer to read ECU when you are away from home.

When using Foxflash to read ECU outdoors, you can use the cigarette lighter to power the device in the car. Use the mobile phone to activate a hotspot to connect your computer to the network.

Here are the steps:

Plug the cigarette lighter into the cigarette lighter socket of the car.

The other end of the cigarette lighter plugs into the Bench device to power it.

Next, turn on your computer.

The software cannot be opened when the computer is not connected to the Internet.

Take out the phone.

Turn on your personal hotspot.

Then use the laptop to find the name of the wifi hotspot turned on by the phone, and enter the hotspot password.

If it shows the connection is successful, you can open the Foxflash software to read the ECU.

You can also click the video below to watch the steps:

KT200 ECU Programmer Added Offline Workstation USB

KT200 ECU Programmer Master Version has added a new feature to read & write ECU/TCU via OBD/Bench/Boot/BDM/Jtag offline. Without having to connect to the Internet, just plug the KT200 Offline Workstation USB Dongle to realize. This is very useful for outdoor ECU tuning where the Internet is too weak or not.

The black is the U disk. It contains software and installation instruction, which should be installed online before it can work offline. The white is the dongle to activate the first-time running.

Note:

For KT200 Auto Version, users should upgrade to the full version before buying the offline workstation USB.

KT200 Reads JCB EDC17CV44 Offline on Bench

Open KT200 software >> Select Driver >> BENCH MODE >> JCB >> TC1767-JCB >> EDC17 CV44 >> OK >> Connect

Keep ECU power on. Click "OK".

Read All >> Save

Keep ECU power on. Click "OK".

Reading in progress... wait until 100%.

End of read, turn the dashboard off. Click "OK".

Completed.

KT200 Reads Renault SID310 Offline by OBD

Open KT200 software >> Select Driver >> Car obd >> JCB >> Renault >> Master >> 2.3 dCi SID310 "CAN >> OK

KT200 Reads VW EDC 16U31 Offline on Bench

Open KT200 software >> Select Driver >> BENCH MODE >> Volkswagen >> MPC56 3/4 - VAG >> DIESEL EDC16 U31 >> Connect

Keep ECU power ON. Click "OK".

Read All >> Save

Keep ECU power on. Click "OK".

Reading in progress... wait until 100%.

End of read, turn the dashboard off. Click "OK".

Completed.

www.obd2shop.co.uk

FoxFlash Reads VW MED17.5 ECU on Bench

How to use FoxFlash to read ECU? Here's reading VW TC1766 VAG MED17.5 ECU on a bench as a demonstration. 

Connection

Connect FoxFlash main unit & bench box via an adapter. 

Connect bench box to MED17.5 ECU via colored jumper. 

Connect to the computer via a USB cable. 

Plug in the power to the bench box.

ECU Reading

Now we can open FoxFlash Software to start reading.

A device serial number prompt appears. Click "Yes" to enter.

Select the corresponding model: "Volkswagen TC1766 VAG MED17.5", click "Connect".

* Keep ECU power ON.

Turn on the jumper switch according to the prompt.

Click "Read Eeprom".

Save data file after reading.

End of reading, turn the dashboard OFF.

Read VW MED17.5 ECU successfully.

www.obd2shop.co.uk

How to use foxFlash Manager Tool

When you receive your foxFlash, how do you use it? This article will guide you on how to do it, let's take a look!

1. Go to https://www.dfb-technology.com/download.html and download the foxFlash Manager app, then install it.

2. Register this app with your email.

3. Enter your binding code on your device.

NOTE: Don't spread your SN on the internet, or others will try to steal your tool's password.

4. Connect your foxflash tool to your laptop via a USB cable, then click the download button located in the foxFlash app inside.

5. After the download is complete, open the folder C:\Program Files(x86)\FoxFlash Manager\foxflash\DFB Technology\DFBTech_DRIVER, then install the drivers.

6. Unplug your foxFlash tool, then plug the USB back in.

7. Click the "Activated" button of the foxFlash manager app until activated, then run the foxFlash app on the desktop, then enter the password in the windows, and click login.

Note: Always run foxflash manager app whenever you need to use our tool. Run it then click the active button, it will continue to allow the tool to access our server.

For more technical services of foxFlash, please follow https://www.obd2shop.co.uk/wholesale/fox-flash-ecu-tcu-clone-chiptuning.html

KT200 V11.01 Software Free Download & Installation Guide

KT200 ECU Programmer's latest software version V11.01 has been released, here you can free download & a guide to install it.

Where to free download KT200 v11.01?

Mega: https://mega.nz/file/NPM0GDZb#PVVHI2mXLekSAiRNd1UvHEom4wLtKcc64isJB7SV6m8

Weiyun: https://share.weiyun.com/T1ZVPy6u (password: zug4hj)

Size: 38.7MB

Compatible system: Win7, Win8/8.1 Win10, Win11.

How to install KT200 v11.01?

Operating video:

Step1. Click the "KT200setup-11.01" package to install the software.

Step2. Install & update KT200 driver:

Computer management >> Device manager >> DESKTOP-FSN5GTS >> Other devices >> DFBTech >> Update driver >> Browse my computer for drivers >> Selected "DFBTech_DRIVER" folder >> Next

Step3. Download software & diagram

Start "KT200 Service" >> Download Software

Start downloading software, the old version will be completely uninstalled and deleted! 

Click "Yes".

Download finished, install or not? If you choose YES, the current version will be uninstalled before installation. 

Click "Yes".

Yes, I accept the terms of the License Agreement! >> Next >> Next >> Finish

Reset the device successfully!

Restart "KT200 Service" >> Download Diagram

Start downloading documents! 

Yes >> Finish

Completed.

Now you can start to use Full Version KT200 software.

www.obd2shop.co.uk

(Solved) KT200 Software V2022.10.01 cannot work

Problem: Recently, some customers reported that when the latest version of KT200 software V2022.10.01 is installed, the gray menu is displayed and cannot be selected and the voltage is not displayed either.

Solution: Uninstall the version 2022.10.01 software, then re-download and install the version 2022.08.20 software.

KT200 V2022.08.20 Download:

https://mega.nz/file/d6YFDD4Z#sIdJrT_V1N7KOQtCBob2feLLj4cH3gZ2yRcMdpEBMrA