Solution: KTAG V7.020 “Internet connection not detected” Grey Icons

Problem: KTAG V7.020 software was failed to identify the device after installation. It prompted “Connexion a internet non detectee: verifiez que vous disposez d'une connexion internet et essayez a nouveau(Internet connection not detected: check that you have an internet connection and try again).” Meanwhile, all icons turned grey.

What’s the problem? Please help me.

Solution

The reason why caused the issue is that the KTAG driver was not installed properly.

1. Check if the KTAG driver was forbidden or deleted by the antivirus program.

2. Reinstall KTAG driver.

3. Wait until the KTAG device is identified, then can open the software.

Hope this can help.

http://blog.obd2shop.co.uk/solution-ktag-v7-020-internet-connection-not-detected-grey-icons/

(Solved) KTAG 7.020 Ksuite V2.25 does not work

Customer Problem:

Hi, I install the Ktag V2.25 software but the menu is all gray and I can't select a car.

I have tried to reinstall it and the result is the same.

I have also tried to install it on another PC and the failure is the same.

I think that for some reason the ktag has stopped working. It appears in the Windows device manager but does not communicate with the ksuite software.

OBD2shop.co.uk engineer solution:

About the gray menu, it is the TF card problem, please take out the TF card and insert it again, check if it can work.

The customer's response:

The software can be selected but still does not work.

"Well, no luck. I have tested with 2 ECUs of Honda Accord 2.2 i-dtec and it does not work with any.

I attach photos with the screenshots.

After a while in which it does not go beyond "identifying ECU" the error in the photo appears."

Below is the ECU wiring diagram:

OBD2shop.co.uk engineer solution:

Please see the attached image.

Branch this red wire out another wire and connect it to the place of the orange wire.

The customer's response:

Well it works. It seems incredible to me that following the instructions of the software it does not work and that in the other ktag that we have it works perfectly with the orange cable and that in this it is necessary to put the 3 red cables.

But hey, I'm happy because in the end it has made it work.

Thank you very much.

http://blog.obd2shop.co.uk/solved-ktag-7-020-ksuite-v2-25-does-not-work/

Read & Write EDC16C35 with kess, ktag, mpps, Galletto clone etc

EDC16C35 ECU reading and writing tools review:  kess, ktag, mpps, Galletto clone etc.

Review 1. Kess v2 5.017 with red pcb

1). Read E60 530d EDC16CP35 with Kess v2 5.017 

Choose by Kline ==> Setup ==> Pull Up ==> 225ohm

takes longer to R/W but does it

2). Read/write Bosch EDC16C35 with kess v2 5.017 clone no problem.

3) Some of the clones works perfect some don't work don't know I got friend he bought kessv2 clone red and its not r/w some ecu he got problems

in my opinion kess 4.03 is best I never got problem with red 5.017 I got on some cars.

4) In bmw cars always good power supply to battery 13.5-14v and never problem to this cars 

edc16c31,c35 and cp35 all going good over obd and with kess or mpps.

today I tried it out, connect a good Battery Charger my Battery was at 13.1V and first Full read with Kess and than Write with kess.

Read 34 Minutes

Write 5-7 Minutes

Usw K-Line on E92 335D and in Options you have tu usw 225 OHM write speed.

Review 2. ktag via BDM

For EDC16C31 and EDC16CP35 I would done backup via ktag first.

you also can write with ktag via bdm... works fine at both.

Review3. with MPPS

- I Read/write Bosch EDC16C35 by MPPS and read/write by kess always no problem ... checksum correction OK.

- My car is BMW e60 530xd with same ecu as yours, and read it with mpps v16. Never write it yet. 

I think the kess is much better from mpps and you may not have a problem with it.

Review 4. Galletto clone works very good with this ecu via obd.

Credits to all users from DK / MHH forums. 

ECU programmers collection: 

https://www.obd2shop.co.uk/wholesale/ecu-chip-tunning/

Read write edc17c60 psa ecu with ktag clone

Read write edc17c60 psa ecu is possible with ktag clone, it is tested. 

No need to attach from underneath. Boot pin connection is next to tricore. You can find picture on Google.

Reading LAST ECU PEUGEOT CITROËN EDC17C60 GPT with Ktag clone V2.25:

Enjoy!

You can order ktag clone here:

https://www.obd2shop.co.uk/wholesale/ktag-v7020-red-pcb-eu-online-version.html 

ktag ecu wiring diagram needed

Question: does Ktag ECU programmer has ecu wiring diagram?
Answer: yes, in the CD. For those who don't have the ktag CD, please free download Ksuite 2.25 for ktag 7.020 on mega:
https://mega.nz/#!REpxwY5D!8FIo0maWqHbmEvHnTskmDVb68YLcZQQyoda5NHrapms
OS: Windows XP, Win7

The software contains ksuite software warnings, notice, recommendation, wiring diagram (how to connect, how to read, how to write...)

Images mean a lot:

Considering there are hundreds of Ktag ecu wiring diagrams in the CD that I can't attach them all here, I screenshot their names below, for anyone you need, please leave your email at www.obd2shop.co.uk for assistance.

Enjoy!

http://blog.obd2shop.co.uk/where-to-download-ktag-ecu-wiring-diagram/

V7.020 KTAG Master V2.23 Free Download & ECU List

KTAG V7.020 V2.33 software download link for free:
https://share.weiyun.com/5i30VvZ
Password: y2c8o6

Software Version: V2.33
Supported Language: English, French, Portuguese, Spanish, Italian, Deutsch
Operating System: Support Wins 7, but better to use Wins XP
Important Note: Disable the Internet connection before installation, otherwise the software may get damaged.

What's new with Ktag Master fw V7.020 sw V2.23?
-Many encrypted new car models works I.E Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F, etc.
-100+ ECU types added, including Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F. (The complete list of the ECU currently supported by K-TAG could be found via: https://www.obd2shop.co.uk/upload/pro/20062315929647292993.pdf)

KTAG V7.020 ECU Programming Tool Master Connection Picture Display:

Cables from left to right:

1.GREEN-CAN L
2.ORANGE-VKEY
3.YELLOW-K LINE
4.ORANGE-VKEY
5. RED-VECU
6.BLACK-GND
7.BLACK-GND
8.PURPLE-VPP
9.RED-VECU
10.WHITE-CAN H

http://blog.obd2shop.co.uk/v7-020-ktag-master-v2-23-free-download-ecu-list/

Free download Ksuite 2.53 for Kess 5.017 China clone: test ok

Free download Ksuite 2.53:
https://mega.nz/#!Lol0GCZR!nOeibBrssBZGwzzvHAlNozrMV3VkVWIl9P0zBT6dcIo

Tested:
Kess 5.017 China clone: yes, works great
ktag 7.020 clone: not okay yet

Test reports:
1. Tested this morning 2.53 ok reading audi a3 ppd ...

2. Tested on WIN7 32bit and it's working fine.
I've read with KESS, a MED17.5.5 by OBD and i'll try a BDM read/write with KTAG tomorrow and I'll share my experience.

Question: Access violation error. SW does not work. DLL folder is just 2mb instead of more than 9mb.
Finally. I just put file i c: and all solved. It works for kess. not k-tag at  the moment

http://blog.obd2shop.co.uk/free-download-ksuite-2-53-for-kess-5-017-china-clone-test-ok/