Read & Write EDC16C35 with kess, ktag, mpps, Galletto clone etc

EDC16C35 ECU reading and writing tools review:  kess, ktag, mpps, Galletto clone etc.

Review 1. Kess v2 5.017 with red pcb

1). Read E60 530d EDC16CP35 with Kess v2 5.017 

Choose by Kline ==> Setup ==> Pull Up ==> 225ohm

takes longer to R/W but does it

2). Read/write Bosch EDC16C35 with kess v2 5.017 clone no problem.

3) Some of the clones works perfect some don't work don't know I got friend he bought kessv2 clone red and its not r/w some ecu he got problems

in my opinion kess 4.03 is best I never got problem with red 5.017 I got on some cars.

4) In bmw cars always good power supply to battery 13.5-14v and never problem to this cars 

edc16c31,c35 and cp35 all going good over obd and with kess or mpps.

today I tried it out, connect a good Battery Charger my Battery was at 13.1V and first Full read with Kess and than Write with kess.

Read 34 Minutes

Write 5-7 Minutes

Usw K-Line on E92 335D and in Options you have tu usw 225 OHM write speed.

Review 2. ktag via BDM

For EDC16C31 and EDC16CP35 I would done backup via ktag first.

you also can write with ktag via bdm... works fine at both.

Review3. with MPPS

- I Read/write Bosch EDC16C35 by MPPS and read/write by kess always no problem ... checksum correction OK.

- My car is BMW e60 530xd with same ecu as yours, and read it with mpps v16. Never write it yet. 

I think the kess is much better from mpps and you may not have a problem with it.

Review 4. Galletto clone works very good with this ecu via obd.

Credits to all users from DK / MHH forums. 

ECU programmers collection: 

https://www.obd2shop.co.uk/wholesale/ecu-chip-tunning/

Difference between MPPS V18 china clone Vs. eu clone

Answer a FAQ: What's the difference between MPPS v18 Chinese and Europe.

1. Vote MPPS V18 China clone:
1). I've got an MPPS v18 china clone. Had it for ages and used it lots. No problems yet.
2). I also use MPPS V18 without any issues.... It's OK...
3). I use china MPPS V18 and work 100%
All of the above 3 pieces of feedbacks from:
https://www.digital-kaos.co.uk/forums/showthread.php/677305-MPPS-V18-EU-CLONE-any-experiences  (Topic: MPPS V18 EU CLONE any
experiences)

2. Vote MPPS V18 eu clone: 
Success...
1). I have eu clone mpps 18 and never had any problem .... (one time i lock an 6O3 but caused by laptop not from mpps...)

I had buy one china 21 mpps and after i use it for ~ 10 times.... guess........... (before buying, i ask the china seller for time bomb, and guess his answer... )

2). I don't know if they have any major difference in how they works, but I feel more safety by using eu clone....(they have different hw)...

Failure......
3). Update for mpps v18 clone But NOT China..... eu clone.....
yesterday I brick an ecu....... read in boot mode flash, micro, eeprom.... all ok
I start one more reading of the flash for compare..... at the half of reading....... no connection with ecu?
the ecu now is dead..... marelli 6o3...... no connection with op-com no hearing of the pump.... a big F on dash...
that is Very sad for me..... i had a big respect for that tool.....
and I don't know if is possible to recover the ecu.....
I Guess not....

To sum up.
The success rate of mpps v18 china clone is equal to the success rate of mpps v18 eu clone.
And mpps v18 china clone is less than 80GBP.

How satisfied are you with mpps v18 or v21?

Experience with mpps v18 & mpps v21 china clone, it's confirmed that it's much benefit to have one.

1.  Mpps v18 is good tool worth having it have some functions kess not have

2. Mpps is a nice tool....
But stay away from v21....
Have timebomb, I used for ~ 10 times, and I was lucky, I don't brick an ecu...
I read one 8f2, try to write back and the tool stop working for good.
the v21 it could not read the flash of a Fiat 6f3,
The v18 read it just fine (the same car)...

3. v21 was a boobytrapped release. Chinese sellers realized this a few weeks after its release and were replacing chips to go back to v18.

MPPS v18 does have some very important functions for me.

I bet the real tool is exceptional.

4. I have MPPS V18 china clone! Have done EDC16U1 more than 20 at this moment with no problem!


5. MPPS v18 clone test reports......
WITH china clone MPPS v18 read write ,iaw59 fiat ,MB edc15c,vw edc15vp/restore after bad chk file/!crafter edc16 -read,iveco edc16 read ,edc16 opel read,but alga 2,4 jtd 2003 -edc16 no read!!!!strange -bmw 320 2000cc year 2001 with bosh edc15c -mpps read only 64 -galleto 256kb.PSG16 opel -read write ok chk correc

Opel Astra H 1.7CDTI 125PS (98002895 Z17DTR DENSO) - R/W OBD(CAN)- ok.
207 edc16c34 Can R/W
ducato edc16c39 RW ok
cosra z10xep bosch med1.1.5 r/w , write in slow only
Astra H Denso Z17DTJ R/W CAN - ok
SEAT ME7.5.10 R/W k-line (cat_off) - ok
Magneti marelli 6F0 full read/write by OBD MPC,Flash EEPROM OK!
Golf 1.6 TDI Siemens Simos Pcr2.1 R/W can (unlock boot mode-ok) - ok
Corsa 1.3cdti marelli mjd6 reads writes ok
OPEL Signum PSG16
2.2CDTI readout as a Zafira.
all OK.

mitsubishi pajero 3.2l did denso 4m41 R/W ok (chinese)
suzuki vitara hdi edc15c2 R/W ok
EDC17C10 PSA boot mode Read OK
Golf TDI EDC17c14
a4 2.5L edc15v obd read and write
1.9SDI EDC15V+ .... generic eeprom OBD K-line R/W-OK Flash OBD K-line R/W-OK
Polo SIMOS 3PE 1.2 12v read/write as generic simens SIM4LE boot mode flash 512kB - OK (catalyst off).
ford edc16c34 2.20 r/w ok
Mazda 6 2.0 MZR-CD 110hp Denso RF8G- OBD R/W - OK
Opel vectra C, PSG16 can, direct conexi?n to pump,read-write-cks, all Ok.
Simos Pcr2.1, obd read-write-cks ok.
mazda cx7 2.2 170 ecu denso dont ok read 4% after error
Lacetti (2008y) 2.0 CDRi EDC16C39 R/W CAN (only map 2Mb) as Captiva = OK
BMW e91 330xd edc16c35 R-W OK China clone
Astra vxr me7.6.2 R/W OK ( do that ecu own risk ! )
Fiat Doblo 1.3 mjet mjd6f3 obd - r/w ok
Range Rover edc17cp11 boot - r/w ok
Corsa D 1.3 CDTI, EDC17C18, 70.0kw,2010, Z13DTE R/W bootmode TriCore™ = OK
GOLF V 1.6 FSI, MED9.5.10, OBD/CAN R/W ( 30 minutes) = OK
Kangoo EDC17C42 bootmode TriCore R/W = OK
Alfa Romeo EDC16C39-5.5 CAN, ok perfect
Eeprom R/W and Flash R/W on VW Golf EDC15P worked perfectly with 70€ V18 from eBay
SID305 BOOT sak1766 read - write Ok
Ford Fusion 1.4 TDCi Siemens Sid 804 R/W OBD CAN = OK
MED17.4 peugeot 207 read write ok
astra h 1.9 tva off OBD and Zafira B 1.9 EGR off OFF ok
simos pcr 2.1 R/W obd ok
Volkswagen Passat 2.0 TDI Siemens PPD 1.X R/W OBD/CAN = OK
Ford Fusion Style 1.6 TDCi Bosch EDC16C34-2 ok
Read written FLESH + MPC + EEPROM fiat marely 6f3, OK through OBD.
Fiat Stilo IAW6JF.P3, through OBD, mpc and eeprom read write for immo-off, all ok.
Linea 2011 Marelli 6F3 read/write OBD Trought K-line,
peugeot 807 ECU DELPHI DCM 3.5 READ OBD OK
Fiat Scudo as (Peugeot 3008) 2.0 HDI Delphi DCM 3.5 R/W OBD/CAN (CRC=OK) = OK
citroen c5 DCM3.5 read write OBD ok, checksum ok
ME7.3.H4 boot mode read /write full OK
Opel cdti 1.7 ecu Denso R/W ok

Suzuki SX4 DDIS 1.9L 120hp, Bosch EDC16C39 2008, can & kline, read & write by obd ok.
opel corsa 1.3jtd MT marelli ecu 6J0 C1,read/write true obd=ok
Audi a4 edc17cp14..read... write obd ok.
NISSAN Q. EDC16CP33 (4A44383842) R/W OBD = OK (CRC-OK).
Jetta 2,0 16v TSi 200cv - MED17.5.2 Tprot10
Read in Boot = OK
made OBD unlock and CKS by MPPS, write boot = OK
tested edc16u1 from T5 2007 1.9tdi AXB 77kw. read write ok over obd on kline.
edc17 vag golf 6 via obd. it took 30min to make the checksum but all ok

Opel Astra H 2010 Z19DTR with Denso MFDX, r/w without a problem

Search "MPPS v18 GOOD OR NOT" at DK forum. you will read more feedback.

Thanks.

Source of MPPS v18 China clone:
http://www.obd2shop.co.uk/wholesale/mpps-v18-main-tricore-multiboot.html