How to Install/Use Iprog + PCF79xx SD-Card Adapter?(V85 Iprog Download)

Buy V84 Iprog Pro ECU Programmer now can upgrade to V85 Iprog's latest version.

Where to download the latest version V85 Iprog version:

https://share.weiyun.com/puRcPZ6G

Password: oipqga

Operating systems: Windows 7

How to install V85 Iprog in Win7?

1. Unzip "iprogV85" to C disk;

2. Computer >> Manage >> Device manager >> Other devices >> Iprog universal programmer >> Update driver software >> Browse my computer for driver software >> Select “iprog_win2k_win7_x86-x64_version2”, click “OK”>> Next >> Install this driver software anyway;

3. Open “IprogProV85” after installation completed, now you can start to program.

How to use Iprog Programmer + PCF79xx SD-card Adapter to read & write key?

1. Insert PCF79xx SD-card Adapter to Iprog programmer, connect with a key & computer via cable;

2. Start Iprog software, follow the path to select: MCU>> PCF79xx + SD;

3. Select PCF type, click “Connect”, the green light of the adapter will be on, which means the connection is successful.

Now you can continue to read & write EEPROM.

This is how to install & use Iprog Programmer + PCF79xx SD-card Adapter.

https://www.obd2shop.co.uk/

Iprog read MC68HC705B32 (UCH) possible and how?

 How to read MC68HC705B32 (UCH) on the Megane in circuit with Iprog programmer?

the diagram that the iprog says it is to read the processor, but the cable from pins 1, 5 and 40 has no connection and as the wire cores are not like the diagram.

Get a multimeter and test what colour wire goes to each pin on adapter then write it down 

then you will see what colours corispond to the colours you need if there then found to not be connected to the pins you need then get a soldering iron and move the wires to the correct pins 

if you cant solder then get someone who can to do it for you.

Iprog tech support: https://www.obd2shop.co.uk/

How does Iprog+ clone read write SRS Unit from Volvo S80?

I just read and wrote this SRS Unit from a Volvo S80 with Iprog+.
It is P30798509 with Motorola 9S12XDT256.
Everything worked fine, but I had to lift Reset pin.
I read both Eеprom and Flash without any problems!
This are the both Eeproms, with a crash and cleared!

I read it with this adapter for Iprog+. When you choose to read MC9S12XDT256 from the menu, there is pinout! Only one different, that you need to lift RESET pin.
I connect only
Gnd
+5v
Reset
BKGD

http://blog.obd2shop.co.uk/how-does-iprog-clone-read-write-srs-unit-from-volvo-s80/

Iprog+ V76 read write chips of Atmel, Fujitsu & microchips, Motorola, Motorola 912EN etc

Using Iprog+ V76 ECU programmer for one week, it works fine for reading and writing the chips of Atmel, Fujitsu & microchips, Motorola, Motorola 912EN, NEC v850, etc.

If you have broken CD, here you can free download link
https://mega.nz/#!lB500aYY!7fQobGqzPhokgB-wU4lUzKCES4ugxAFrfRhyb13Wisw
Password: No need
Uploaded by Laurance from obd2shop.co.uk

Iprog+ V76 driver update first:
Open the CD.
Click on "7z1900-32bit" to install (because I am sure my computer is 32BIT).

Copy to " iProg+_2019_00001" to the desktop.
Right click on " iProg+_2019_00001", choose "7-zip" to extract.

It prompts one message "Device (iProg+) driver software was not successfully installed".
Right click on "Computer" -> "Manage" -> "Device Manager", right click on "iProg universal programmer" and choose "Update Driver software".
Choose "Browse my computer for driver software"
Select the "Driver" folder".
Click on "Install this driver software".
Driver software was successfully updated.

Open Iprog+ V76 software, has many functions menu.

Click on "MCU", have options: Atmel, Fujitsu, and microchips, Motorola, Motorola 912EN, NEC v850.

Atmel:
Atmega 32
Atmega 8
Atmel Autodetect
Atmel Autodetect2
ATtiny2313
ATtiny26
ATtiny4313
ATtiny45

Fujitsu:
MB90F035
MB90XXX
MB91F0XX
MB91FXXX
MB91FXXX-II
MB95F1XX
MB96XXX

Microchip:
PIC12F
PIC16F
PIC18F
PIC24FJ

Motorola:
908
912
9S08
9S12G
9S12XE
9S12XS
9S12XX
MC68HC05
MC68HC11

Motorola912EN
912
9S12A
9S12C
9S12D
9S12E
9S12G
9S12H
9S12HA
9S12HY
9S12HZ
9
S12P
9S12X
9S12XHY
9S12XS

NECv850:
1725
1797
V850E
V850ES
V850ES Fx3
V850ES Fx3-N
V850_SAM_Mers_Sprinter

Highly recommend, Iprog+ V76 ECU programmer.

V69 V55 Iprog+ Programmer clone free download and install

Offer Iprog+ Programmer clone V55, Iprog+ V69 software download link, installation, usage, and test results.

iProgPro_2018 .zip
725.9 MB
https://mega.nz/#!7LxjCRqD!53iXL6K3Ku_3SAzSN0-3po885aFJYLPSrnTyTYhr1Vg 
Version: V59
IPROG+ (with software)
EEPROM adapter
BDM/UART/MBUS adapter
OBDII (4in1) CAN+K-line adapter
RFID (2 in 1) 124khz-134khz adapter
44_PIN_BOARD

iProgPro 2019
Version: V69
https://share.weiyun.com/5uXyjoC
password: 4p1sx1

Package list: 
1pc x iprog+  Main Unit
1pc x RFID 125+134 adapter
1pc x Eeprom adapter
1pc x UARTBDM adapter
1pc x OBD Cable
1pc x USB
1pc x CD

How To Install Iprog+ Programmer Software? 


How To Reset Odometer on Your Vehicle with Iprog+ Pro?

Confirmed working:
1. Airbag reset...confirmed working
Read and erase crash to some cars
Read and erase DTC
Repair CFG

2. Read & write KM...confirmed working
Read km
Write a new km

3. Car Radio & ECU ...confirmed working
Car Radio:
Read and erase info
Reset count

4. ECU...confirmed working
Immo OFF
DPF off

5. EEPROM ...confirmed working
Read/write/erase EEPROM

6. IMMO...confirmed working
Program and copy chips for cars and truck
Unlock keys
Cover Toyota smart keys: reset key prepare
Write a key by immo dump

7. MCU...confirmed working
Read and write chips
Cover chips Atmel, Fujitsu, and microchips Motorola, NEC v850

8. Special functions...confirmed working
Mile to km
Pincode from dump

Done.

Enjoy.

http://blog.obd2shop.co.uk/v69-v55-iprog-programmer-clone-free-download-and-install/