Foxflash OBD VR file and Firmware Update

Good news!! Foxflash has the latest update.

OBD VR file update:

MED17.5.25 DCM6.2A DCM6.2V DCM6.2C

PCR2.1 SIMOS18.1 EDC17C74

foxFlash Manager Update:

FW update to D086

Notifications add

Checksum fix:

Marelli 9DF

Marelli MJD602.M1 - 603.S3

Bosch EDC17CP44

Stay tuned for further news

https://www.obd2shop.co.uk/wholesale/fox-flash-ecu-tcu-clone-chiptuning.html

FoxFlash Continental GPEC2 GPEC3 GPEC4LM GPEC2A ECU Update

FoxFlash Update on 15th, Mar: added to perform FCA group Continental GPEC2, GPEC3, GPEC4LM, GPEC2A ECU on boot.

New Added Functions:

Boot Read

Boot Write

New Added ECU List:

Continental GPEC2, GPEC3, GPEC4LM, GPEC2A

Chrysler 200 Continental GPEC3  BOOT

Chrysler 200 Continental GPEC3  BOOT

Chrysler 300 MK2 Continental GPEC2A  BOOT

Chrysler 300 MK2 Continental GPEC2A  BOOT

Chrysler Aspen Continental GPEC2A  BOOT

Chrysler Grand Vojager Continental GPEC2A  BOOT

Chrysler Town & Country Continental GPEC2A  BOOT

Dodge Avenger Continental GPEC2A  BOOT

Dodge Avenger Continental GPEC2A  BOOT

Dodge Challenger Continental GPEC2A  BOOT

Dodge Challenger Continental GPEC2A  BOOT

Dodge Charger Continental GPEC2A  BOOT

Dodge Charger Continental GPEC2A  BOOT

Dodge Dart Continent GPEC3  BOOT

Dodge Durango Continental GPEC2A  BOOT

Fiat Tipo Continental GPEC4LM  BOOT

Fiat Toro Continental GPEC3  BOOT

Fiat Toro Continental GPEC4LM  BOOT

Fiat 500X Continental GPEC3  BOOT

Fiat 500X Continental GPEC4LM  BOOT

Jeep Cherokee Continental GPEC3  BOOT

Jeep Cherokee Continental GPEC4  BOOT

Jeep Compass Continental GPEC3  BOOT

Jeep Cherokee Continental GPEC4LM  BOOT

Jeep Gladiator Continental GPEC2A  BOOT

Jeep Gran Commander Continental GPEC4  BOOT

Jeep Renegade Continental GPEC3  BOOT

Jeep Wrangler Continental GPEC4  BOOT

How to update FoxFlash Software?

Run the FoxFlash Manager, and click the "Download" button until all is done.

www.obd2shop.co.uk

foxFlash 25.02 Update protocols for Porsche PDK

Good news!! foxFlash 25.02 update protocols for Porsche PDK and now you can easily read and write Porsche PDK gearbox!

Supported Control Units & Vehicles:

BOOT

Porsche 911.2 Siemens PDK4000

Porsche 918 Siemens PDK3000

Porsche 918 Siemens PDK4000

Porsche Boxster 718 Siemens PDK3000

Porsche Boxster 981 Siemens PDK4000

Porsche Carrera 991 Siemens PDK3000

Porsche Carrera 991 Siemens PDK4000

Porsche Cayman Siemens PDK4000

Porsche Macan Siemens PDK3000

Porsche Macan Siemens PDK4000

Porsche Panamera Siemens PDK3000

Porsche Panamera Siemens PDK4000

Update method: run the foxFlash manager, and click the download button till everything is done.

How to Clone Tricore ECU with FoxFlash/KT200 Tool?

FoxFlash & KT200 Programmer can support cloning ECU function as OBDSTAR DC706. This is an introduction on how to clone Tricore ECU with new KT200 software step by step. The procedure may apply to FoxFlash software as well.

Step1. Read ECU data via "BOOT MODE TRICORE" or "BENCH TRICORE" option. Including Micro FLASH, EEPROM data from original ECU & new ECU.

Step2. Select Menu >> Select Drive >> TOOL BOOT >> TOOLS BOOT MODE - INFINEON TRICORE Clone Service >> ECU Model

Step3. Fill 1st option with original ECU Micro file, fill 2nd option with new ECU Micro file.

Step4. Click "CLONE & SAVE" to save new ECU file.

Step5. Select BOOT MODE >> INFINION TRICORE Boot >> ECU Model >> Load new ECU file >> Write to new ECU

* BENCH TRICORE may cause incomplete writing of ECU data(Boot is recommended)

Attention

1. Please write the original EEPROM to new ECU with no changes;

2. Please write Micro FLASH & EEPROM data separately, CANNOT read & write together;

3. If the Micro FLASH data cannot be written, it needs to be processed manually with winols. Or asking help for a professional engineer.

4. Nonsupport VW 5th generation IMMO system.

Technical Support

www.obd2shop.co.uk

How to use foxFlash tool to read ECU outdoors

This post will guide you on how to use foxFlash ECU programmer to read ECU when you are away from home.

When using Foxflash to read ECU outdoors, you can use the cigarette lighter to power the device in the car. Use the mobile phone to activate a hotspot to connect your computer to the network.

Here are the steps:

Plug the cigarette lighter into the cigarette lighter socket of the car.

The other end of the cigarette lighter plugs into the Bench device to power it.

Next, turn on your computer.

The software cannot be opened when the computer is not connected to the Internet.

Take out the phone.

Turn on your personal hotspot.

Then use the laptop to find the name of the wifi hotspot turned on by the phone, and enter the hotspot password.

If it shows the connection is successful, you can open the Foxflash software to read the ECU.

You can also click the video below to watch the steps:

FoxFlash Reads VW MED17.5 ECU on Bench

How to use FoxFlash to read ECU? Here's reading VW TC1766 VAG MED17.5 ECU on a bench as a demonstration. 

Connection

Connect FoxFlash main unit & bench box via an adapter. 

Connect bench box to MED17.5 ECU via colored jumper. 

Connect to the computer via a USB cable. 

Plug in the power to the bench box.

ECU Reading

Now we can open FoxFlash Software to start reading.

A device serial number prompt appears. Click "Yes" to enter.

Select the corresponding model: "Volkswagen TC1766 VAG MED17.5", click "Connect".

* Keep ECU power ON.

Turn on the jumper switch according to the prompt.

Click "Read Eeprom".

Save data file after reading.

End of reading, turn the dashboard OFF.

Read VW MED17.5 ECU successfully.

www.obd2shop.co.uk

How to use foxFlash Manager Tool

When you receive your foxFlash, how do you use it? This article will guide you on how to do it, let's take a look!

1. Go to https://www.dfb-technology.com/download.html and download the foxFlash Manager app, then install it.

2. Register this app with your email.

3. Enter your binding code on your device.

NOTE: Don't spread your SN on the internet, or others will try to steal your tool's password.

4. Connect your foxflash tool to your laptop via a USB cable, then click the download button located in the foxFlash app inside.

5. After the download is complete, open the folder C:\Program Files(x86)\FoxFlash Manager\foxflash\DFB Technology\DFBTech_DRIVER, then install the drivers.

6. Unplug your foxFlash tool, then plug the USB back in.

7. Click the "Activated" button of the foxFlash manager app until activated, then run the foxFlash app on the desktop, then enter the password in the windows, and click login.

Note: Always run foxflash manager app whenever you need to use our tool. Run it then click the active button, it will continue to allow the tool to access our server.

For more technical services of foxFlash, please follow https://www.obd2shop.co.uk/wholesale/fox-flash-ecu-tcu-clone-chiptuning.html