KT200 ECU Programmer Added Offline Workstation USB

KT200 ECU Programmer Master Version has added a new feature to read & write ECU/TCU via OBD/Bench/Boot/BDM/Jtag offline. Without having to connect to the Internet, just plug the KT200 Offline Workstation USB Dongle to realize. This is very useful for outdoor ECU tuning where the Internet is too weak or not.

The black is the U disk. It contains software and installation instruction, which should be installed online before it can work offline. The white is the dongle to activate the first-time running.

Note:

For KT200 Auto Version, users should upgrade to the full version before buying the offline workstation USB.

KT200 Reads JCB EDC17CV44 Offline on Bench

Open KT200 software >> Select Driver >> BENCH MODE >> JCB >> TC1767-JCB >> EDC17 CV44 >> OK >> Connect

Keep ECU power on. Click "OK".

Read All >> Save

Keep ECU power on. Click "OK".

Reading in progress... wait until 100%.

End of read, turn the dashboard off. Click "OK".

Completed.

KT200 Reads Renault SID310 Offline by OBD

Open KT200 software >> Select Driver >> Car obd >> JCB >> Renault >> Master >> 2.3 dCi SID310 "CAN >> OK

KT200 Reads VW EDC 16U31 Offline on Bench

Open KT200 software >> Select Driver >> BENCH MODE >> Volkswagen >> MPC56 3/4 - VAG >> DIESEL EDC16 U31 >> Connect

Keep ECU power ON. Click "OK".

Read All >> Save

Keep ECU power on. Click "OK".

Reading in progress... wait until 100%.

End of read, turn the dashboard off. Click "OK".

Completed.

www.obd2shop.co.uk