Can ksuite 2.47 and ksuite 2.25 run at the same time?

Confirmed 1~
Yes: Kess V2 clone with Ksuite V2.47 and another one with 2.25 can be installed on two different computers.

Confirmed 2 ~
No: You can't use ksuite 2.47 and ksuite 2.25 at the same time on two computers.

Question:
Can I use clone kess in one computer with ksuite 2.25 and other one with 2.47 and no make the conflict in the firmware of interface?
I ask that because in one computer I have ktag (2.25) and I want to install a laptop with the last close software for kess but I want to use on both.

Answer:
on the same pc yes at the same time no
you can have both versions of ksuite installed on your pc and run 1 at a time

ksuite 2.47 installation on win7 for Kess V2 clone

Good luck.

Med17.5 tc1766 Ktag read without opening the ecu

Topic: How does Ktag read Bosch Med17.5 with tri-core tc1766 without opening the ecu.
Here you can go:

pinout GPT cable

It's for PCM bench flash it can read without opening ecu case but the GPT points were not listed properly and it uses the same points as Ktag, disport.

www.obd2shop.co.uk

V54 FGTech Galletto 0475 0386 Free download: Tested Working OK

Offer V54 FGTech Galletto 0475 0386 free download links, installation video, Improvements of V54 FGTech Galletto 0475, V54 FGTech Galletto 0475 coverage, etc.

V54 FGTech Galletto 0386 Free download:
https://share.weiyun.com/58wTnWK 
Pass: zq9fxs

Tested interface:
http://www.obd2shop.co.uk/wholesale/new-v54-fgtech-galletto-4-master-bdm-tricore-obd-function.html

V54 FGTech Galletto 0475 free download:
https://share.weiyun.com/52860Q6
Pass: 3x2v6k

Both of the above links are uploaded by www.obd2shop.co.uk engineer.
Security: 100% Yes

Tested interface:
http://www.obd2shop.co.uk/wholesale/euro-0475-version-v54-fgtech-galletto-2-master.html

V54 FGTech Galletto 0475 win7 installation:


English, Spanish, French, Italian, German, Czech, Portuguese, Turkish
Windows XP, win7 32bit

Improvements of V54 FGTech Galletto 0475:
1. In the past: Trying to install Galletto V54 0386 on  Windows 7 x 64 bit, couldn't get the driver to load.  and you may consider the FGtech unit is defective. For experienced users, their Solution is to change the date worked for them.

Today:
All you who has date changing problems or don't work windows 7 or Windows 10 OS, update your tool from 0386 to 0475. Then all these issues are gone!!!!

2. Reprogram to 0475 and then you can use better software and also windows 7/10 32/64 bit OS.

3. Galletto V54 0475 is Euro version, a better one than Galletto V54 0386, but it has different hardware compare to 0386 (Chinese).
This is Galletto V54 0475 PCB:

4. Moreover, Fgtech Galletto V54 0475 works with more car models even checksum works:
Read this article for FGTech Galletto 2 V54 0475 coverage.

V69 V55 Iprog+ Programmer clone free download and install

Offer Iprog+ Programmer clone V55, Iprog+ V69 software download link, installation, usage, and test results.

iProgPro_2018 .zip
725.9 MB
https://mega.nz/#!7LxjCRqD!53iXL6K3Ku_3SAzSN0-3po885aFJYLPSrnTyTYhr1Vg 
Version: V59
IPROG+ (with software)
EEPROM adapter
BDM/UART/MBUS adapter
OBDII (4in1) CAN+K-line adapter
RFID (2 in 1) 124khz-134khz adapter
44_PIN_BOARD

iProgPro 2019
Version: V69
https://share.weiyun.com/5uXyjoC
password: 4p1sx1

Package list: 
1pc x iprog+  Main Unit
1pc x RFID 125+134 adapter
1pc x Eeprom adapter
1pc x UARTBDM adapter
1pc x OBD Cable
1pc x USB
1pc x CD

How To Install Iprog+ Programmer Software? 


How To Reset Odometer on Your Vehicle with Iprog+ Pro?

Confirmed working:
1. Airbag reset...confirmed working
Read and erase crash to some cars
Read and erase DTC
Repair CFG

2. Read & write KM...confirmed working
Read km
Write a new km

3. Car Radio & ECU ...confirmed working
Car Radio:
Read and erase info
Reset count

4. ECU...confirmed working
Immo OFF
DPF off

5. EEPROM ...confirmed working
Read/write/erase EEPROM

6. IMMO...confirmed working
Program and copy chips for cars and truck
Unlock keys
Cover Toyota smart keys: reset key prepare
Write a key by immo dump

7. MCU...confirmed working
Read and write chips
Cover chips Atmel, Fujitsu, and microchips Motorola, NEC v850

8. Special functions...confirmed working
Mile to km
Pincode from dump

Done.

Enjoy.

http://blog.obd2shop.co.uk/v69-v55-iprog-programmer-clone-free-download-and-install/

Two methods to fix Fgtech V54 0386 Software for Win7-64bit - tested 100%

Offer two methods to fix Fgtech V54 0386 Software for Win7-64bit - tested 100%.

Method 1: 

Fgtech V54 0386 AES Software FIX for Win7-64bit

1. Fix driver for win7-64bit .. DRIVER CANNOT START CODE 10...AND FUNCTIONING TOGETHER BDM100 SOFTWARE AND DRIVER 

ON THE SAME PC WINDOWS 7-64Bbit

2. AES Software

3. Fix read 5% error

https://mega.nz/#!DA0xGI5K

Method 2: Fgtech V54 0475

All you who have data changing problems or don't work windows 7 or Windows 10 OS, update your Fgtech V54 tool from 0386 to 0475, then all these issues are gone. 

I just checked it and 0475 is Euro version, a better one than mine, but it has different hardware compare to 0386 (Chinese)

Reprogram to 0475 and then you can use better software and also windows 7/10 32/64 bit OS.  

Fgtech V54 0475 free download:

https://share.weiyun.com/52860Q6

password: 3x2v6k 

FGTech 0475 Galletto V54 Master install on Win7: 

                          

Fgtech V54 0475 hardware:

Image source: 

http://www.obd2shop.co.uk/wholesale/euro-0475-version-v54-fgtech-galletto-2-master.html 

http://blog.obd2shop.co.uk/fgtech-v54-0386-software-fix-for-win7-64bit-tested-100/

Mercedes ME9.7 Engine get broken, what need & how to do?

Topic: Mercedes ME9.7 Engine get broken? what need & how to do? 

Need:
1. New Mercedes ME9.7 ECU ECM Engine like this one:
Here I attach 3images of ME9.7 ECU incl. outlook and pcb.

2. Ktag V7.020 / KTM100 ECU programmer:
Such as:
Ktag V7.020 with 4 led indicators (Red PCB)
Ktag V7.020 (Red PCB)

Image: How to connect the special cable between Ktag and the New ME9.7 Engine.

After the original ECU data is read out, you can use the Mercedes ECU ME9.7/272/273/ renew cable to connect KTM100 or KTAG
to write the new ECU data into the new Mercedes ME9.7 Engine instead of dismantling the new ECU.

3. Mercedes ECU ME9.7/272/273/ renew cable

Full package: SO449+SE135-B1+SF237

This package offers a completely easy way to solve Mercedes ME9.7 ECU broken problem.

How to use Ktag KTM100 renew the data of Mercedes ME9.7 engine? 
Step 1: Read out the original Mercedes ME9.7 ECU data with KTAG (If you don't have the renew cable, you are supposed to read the data by removing the ECU).

Take Mercedes S350 (W211) 2006 with ECU Bosch ME 9.7 for example. 
Choose a model in KTag software

IMPORTANT: make a backup copy of the ECU
Plug the ECU to the Ktag programmer
Pin 2 = GND
Pin 15, 16 = +12V

Ktag is used to read Bosch Me 9.7 Mercedes (P102)

Succeed!
Save data.

***Now, don't forget the above-mentioned renew cable, with it you don't need to dismantle the ECU.

Step 2:
Install the brand new Mercedes ME9.7 ECU ECM Engine.

Step 3:
Write the original ME9.7 ECM data into the brand new ECM with the help of Ktag / KTM100.

Done

Hope it helps.

http://blog.obd2shop.co.uk/how-to-renew-a-replaced-mercedes-me9-7-engine-with-ktag-kess/

Solution to Xprog M V5.84 fails to read Serial EEPROM

Error:
Xprog V5.84 failed to read serial EEPROM, don’t display EEPROM options.
Error “For information, please refer to xprog-m users manual”

Solution by obd2shop.co.uk engineer:

The users were notified that Xprog v5.84 had no EEPROM capabilities which was different from V5.74/5.60/5.55 etc, however, the newest v5.84 software modified the software to enable EEPROM reading capabilities.

Xprog V5.84 New Software Free Download
Includes:

- Windows XP/Windows 7/Windows 8 Work
-English/Chinese
-Disable anti-virus software because the above software contains .exe program, actually they are safe.

3 Tips for installing Xprog V5.84:
1. Uninstall all the software and USB drivers of the old version xprog-box on your computer, then install the new XPROG5.84 software.
2. Run 5.84Regsisty program for several times when installing software
3. Run 5.84Regsisty file for 2 times before you run software every time.

Xprgo V5.84 software installs on Windows 7: 


www.obd2shop.co.uk