How to use foxFlash tool to read ECU outdoors

This post will guide you on how to use foxFlash ECU programmer to read ECU when you are away from home.

When using Foxflash to read ECU outdoors, you can use the cigarette lighter to power the device in the car. Use the mobile phone to activate a hotspot to connect your computer to the network.

Here are the steps:

Plug the cigarette lighter into the cigarette lighter socket of the car.

The other end of the cigarette lighter plugs into the Bench device to power it.

Next, turn on your computer.

The software cannot be opened when the computer is not connected to the Internet.

Take out the phone.

Turn on your personal hotspot.

Then use the laptop to find the name of the wifi hotspot turned on by the phone, and enter the hotspot password.

If it shows the connection is successful, you can open the Foxflash software to read the ECU.

You can also click the video below to watch the steps:

KT200 ECU Programmer Added Offline Workstation USB

KT200 ECU Programmer Master Version has added a new feature to read & write ECU/TCU via OBD/Bench/Boot/BDM/Jtag offline. Without having to connect to the Internet, just plug the KT200 Offline Workstation USB Dongle to realize. This is very useful for outdoor ECU tuning where the Internet is too weak or not.

The black is the U disk. It contains software and installation instruction, which should be installed online before it can work offline. The white is the dongle to activate the first-time running.

Note:

For KT200 Auto Version, users should upgrade to the full version before buying the offline workstation USB.

KT200 Reads JCB EDC17CV44 Offline on Bench

Open KT200 software >> Select Driver >> BENCH MODE >> JCB >> TC1767-JCB >> EDC17 CV44 >> OK >> Connect

Keep ECU power on. Click "OK".

Read All >> Save

Keep ECU power on. Click "OK".

Reading in progress... wait until 100%.

End of read, turn the dashboard off. Click "OK".

Completed.

KT200 Reads Renault SID310 Offline by OBD

Open KT200 software >> Select Driver >> Car obd >> JCB >> Renault >> Master >> 2.3 dCi SID310 "CAN >> OK

KT200 Reads VW EDC 16U31 Offline on Bench

Open KT200 software >> Select Driver >> BENCH MODE >> Volkswagen >> MPC56 3/4 - VAG >> DIESEL EDC16 U31 >> Connect

Keep ECU power ON. Click "OK".

Read All >> Save

Keep ECU power on. Click "OK".

Reading in progress... wait until 100%.

End of read, turn the dashboard off. Click "OK".

Completed.

www.obd2shop.co.uk

FoxFlash Reads VW MED17.5 ECU on Bench

How to use FoxFlash to read ECU? Here's reading VW TC1766 VAG MED17.5 ECU on a bench as a demonstration. 

Connection

Connect FoxFlash main unit & bench box via an adapter. 

Connect bench box to MED17.5 ECU via colored jumper. 

Connect to the computer via a USB cable. 

Plug in the power to the bench box.

ECU Reading

Now we can open FoxFlash Software to start reading.

A device serial number prompt appears. Click "Yes" to enter.

Select the corresponding model: "Volkswagen TC1766 VAG MED17.5", click "Connect".

* Keep ECU power ON.

Turn on the jumper switch according to the prompt.

Click "Read Eeprom".

Save data file after reading.

End of reading, turn the dashboard OFF.

Read VW MED17.5 ECU successfully.

www.obd2shop.co.uk

How to use foxFlash Manager Tool

When you receive your foxFlash, how do you use it? This article will guide you on how to do it, let's take a look!

1. Go to https://www.dfb-technology.com/download.html and download the foxFlash Manager app, then install it.

2. Register this app with your email.

3. Enter your binding code on your device.

NOTE: Don't spread your SN on the internet, or others will try to steal your tool's password.

4. Connect your foxflash tool to your laptop via a USB cable, then click the download button located in the foxFlash app inside.

5. After the download is complete, open the folder C:\Program Files(x86)\FoxFlash Manager\foxflash\DFB Technology\DFBTech_DRIVER, then install the drivers.

6. Unplug your foxFlash tool, then plug the USB back in.

7. Click the "Activated" button of the foxFlash manager app until activated, then run the foxFlash app on the desktop, then enter the password in the windows, and click login.

Note: Always run foxflash manager app whenever you need to use our tool. Run it then click the active button, it will continue to allow the tool to access our server.

For more technical services of foxFlash, please follow https://www.obd2shop.co.uk/wholesale/fox-flash-ecu-tcu-clone-chiptuning.html

KT200 V11.01 Software Free Download & Installation Guide

KT200 ECU Programmer's latest software version V11.01 has been released, here you can free download & a guide to install it.

Where to free download KT200 v11.01?

Mega: https://mega.nz/file/NPM0GDZb#PVVHI2mXLekSAiRNd1UvHEom4wLtKcc64isJB7SV6m8

Weiyun: https://share.weiyun.com/T1ZVPy6u (password: zug4hj)

Size: 38.7MB

Compatible system: Win7, Win8/8.1 Win10, Win11.

How to install KT200 v11.01?

Operating video:

Step1. Click the "KT200setup-11.01" package to install the software.

Step2. Install & update KT200 driver:

Computer management >> Device manager >> DESKTOP-FSN5GTS >> Other devices >> DFBTech >> Update driver >> Browse my computer for drivers >> Selected "DFBTech_DRIVER" folder >> Next

Step3. Download software & diagram

Start "KT200 Service" >> Download Software

Start downloading software, the old version will be completely uninstalled and deleted! 

Click "Yes".

Download finished, install or not? If you choose YES, the current version will be uninstalled before installation. 

Click "Yes".

Yes, I accept the terms of the License Agreement! >> Next >> Next >> Finish

Reset the device successfully!

Restart "KT200 Service" >> Download Diagram

Start downloading documents! 

Yes >> Finish

Completed.

Now you can start to use Full Version KT200 software.

www.obd2shop.co.uk

(Solved) KT200 Software V2022.10.01 cannot work

Problem: Recently, some customers reported that when the latest version of KT200 software V2022.10.01 is installed, the gray menu is displayed and cannot be selected and the voltage is not displayed either.

Solution: Uninstall the version 2022.10.01 software, then re-download and install the version 2022.08.20 software.

KT200 V2022.08.20 Download:

https://mega.nz/file/d6YFDD4Z#sIdJrT_V1N7KOQtCBob2feLLj4cH3gZ2yRcMdpEBMrA

(Solved) KT200 software Cannot find 'DFB2XX.dll' Error

Problem: After installing the KT200 software, it cannot be opened or reinstalled and the message "Cannot find 'DFB2XX.dll'" is displayed. What should I do?

Solution: Copy the DFB2XX.dll file to the C:\Windows\SysWOW 64 directory, if it is a 32-bit system, the path is C:\Windows\System32

DFB2XX.dll file Download free:

https://mega.nz/file/t4xmhIoC#BBzV4tnoacSGA3vB-AwQDVP7gzWwT7ouSd2-yqm_Qqk

Note: The files in this link are compressed packages, which must be unzipped before replacement.

For more technical support, please follow http://blog.obd2shop.co.uk/

KT200 10.01 Free Download & ECU Coverage New Update

Here www.obd2shop.co.uk provide the latest version of KTM200 10.01 software free download link and ECU supported update content.

Where to free download KT200 10.01

https://mega.nz/file/MKd03YQA#wpv1vARRRYNx9dERkYbIIoPdoaEMrVErVVLRUJYJP4k

Size: 885.6MB

Operating system: Win7, Win8/8.1, Win10, Win11

KTM200 ECU Programmer New Features

Tricore Clone Automatic Function

Added automatism to clone the following control units with OTP zone adaptation and password:

- MED17.5 AUDI

- MED17.5.25 AUDI

- MEVD17.4.2 CITROEN

- EDC17 C08 HYUNDAI

- EDC17 C53 HYUNDAI

- EDC17 C08 KIA

- EDC17 C53 KIA

- EDC17 C66 MERCEDES BENZ

- MEVD17.4.2 PEUGEOT

- MED17.5 SEAT

- MED17.5.25 SEAT

- MED17.5 SKODA

- MED17.5.25 SKODA

- ME17.9.20 SMART

- EDC17 C73 TOYOTA

- MED17.5 VOLKSWAGEN

- MED17.5.25 VOLKSWAGEN

New full system for Mercedes truck & CLAAS continental ACM/MCM

Until now, the K-line MCM2 D1/D2 and ACM versions were supported.

Full reading of MCM2.1 D3/D4 and ACM2.1 in CAN line is now also available.

- Reading and writing Micro

- Reading and writing EEPROM

- Recovery

- Checksum

To enable full system communication in D4 hardware versions, it will be necessary to

perform simple unlocking operations with the control unit open by performing bridges on the PCB. At the end it will be possible to close the control unit and read and write all the contents from the pinout.

Follow the instructions in the operating manuals.

PSA HYBRID4 HV17.4

Bench Mode Per Centraline PSA HYBRID4 HV17.4

Full reading of Citroen/Peugeot HYBRID4 ECUs via pinout added. 

The ECU has 2 internal HCUs.

- Reading and writing Micro HCU1 / HCU2

- Reading and writing EEPROM HCU1 / HCU2

- Recovery

- Checksum

Boot Mode (BAM) for EMS S8 e CRD2

We have added new BOOT MODE (BAM) for complete control unit management on SCANIA:

- CONTINENTAL EMS S8

and new BOOT MODE (BAM) for MERCEDES BENZ / FCA with control units:

- DELPHI CRD2.xx (Versioni SOLENOID e PIEZOTEC)

This makes reading and writing ECU in open mode easier compared to the previous JTAG mode (JTAG function still available). Furthermore, with this method, it's no longer necessary for Delphi CRD2.xx SOLENOIDs to open the ECU from the underside.

- Reading Micro + Eeprom

- Writing Micro + Eeprom

- Recovery

- Checksum

New Automatic Function: Tricore Clone

Added automatism to clone the following control units with OTP zone adaptation and password:

- BMW MEVD17.2.8

- BMW MEVD17.2.H

- FIAT DCU17 PC42

- MERCEDES BENZ EDC17 CP10

- MERCEDES DCU17 PC42

- MINI MEVD17.2.8

- MINI MEVD17.2.H

- RENAULT DCU17 PC42

- VOLVO EDC17 CP48

Continental GPEC2, GPEC3, GPEC4, GPEC4LM !

New BOOT MODE (BAM) for ECUs Continental GPEC fitted on vehicles FCA Fiat, Jeep, Chrysler, Dodge:

- Continental GPEC2A

- Continental GPEC3

- Continental GPEC4

- Continental GPEC4LM

- Reading Micro + Eeprom

- Writing Micro + Eeprom

- Recovery

- Checksum

Cummins CM2200 Dodge Chrysler

Added JTAG MODE for control unit Continental Cummins CM2200 for vehicles Dodge And Chrysler.

- Reading

- Writing

- Recovery

- Checksum

New Boot Modes For Delphi DCM7.1 A/B PSA

Boot Mode Solution For Delphi ECU DCM7.1A / DCM7.1B

Added New Boot Mode for micro AURIX TC297 for ECUs DCM7.1A and DCM7.1B mounted on PSA group cars.

- Reading

- Writing

- Recovery

- Checksum

Updates for JTAG - Bench - OBD

- New boot via pinout for Mitsubishi Outlander 2.0 Petrol

- Read and write

- Recovery

- Checksum

Added JTAG mode for Adblue ACM Volvo Trucks Euro 6 control unit

- Read

- Writing

- Recovery

- Checksum

Added to the OBD driver for Marelli 9DF FCA also the VIRTUAL reading, in addition to the real reading already present.

Exclusive! - Full System for Marelli 9GF and 8GSW sw version from 2020

- Full System Marelli 9GF for software version from 2020

- Full System Marelli 8GSW for software version from 2020

Added new full system drivers for Marelli 9GF and Marelli 8GSW control units for versions with software update blocked since 2020. On these control units with updated software was no longer allowed the complete reading of micro and eeprom from pinout.

Is now possible: read and write the complete content without opening the control unit.

- Reading and writing Micro

- Reading and writing EEPROM

- Recovery

- Checksum

www.obd2shop.co.uk