KT200 10.01 Free Download & ECU Coverage New Update

Here www.obd2shop.co.uk provide the latest version of KTM200 10.01 software free download link and ECU supported update content.

Where to free download KT200 10.01

https://mega.nz/file/MKd03YQA#wpv1vARRRYNx9dERkYbIIoPdoaEMrVErVVLRUJYJP4k

Size: 885.6MB

Operating system: Win7, Win8/8.1, Win10, Win11

KTM200 ECU Programmer New Features

Tricore Clone Automatic Function

Added automatism to clone the following control units with OTP zone adaptation and password:

- MED17.5 AUDI

- MED17.5.25 AUDI

- MEVD17.4.2 CITROEN

- EDC17 C08 HYUNDAI

- EDC17 C53 HYUNDAI

- EDC17 C08 KIA

- EDC17 C53 KIA

- EDC17 C66 MERCEDES BENZ

- MEVD17.4.2 PEUGEOT

- MED17.5 SEAT

- MED17.5.25 SEAT

- MED17.5 SKODA

- MED17.5.25 SKODA

- ME17.9.20 SMART

- EDC17 C73 TOYOTA

- MED17.5 VOLKSWAGEN

- MED17.5.25 VOLKSWAGEN

New full system for Mercedes truck & CLAAS continental ACM/MCM

Until now, the K-line MCM2 D1/D2 and ACM versions were supported.

Full reading of MCM2.1 D3/D4 and ACM2.1 in CAN line is now also available.

- Reading and writing Micro

- Reading and writing EEPROM

- Recovery

- Checksum

To enable full system communication in D4 hardware versions, it will be necessary to

perform simple unlocking operations with the control unit open by performing bridges on the PCB. At the end it will be possible to close the control unit and read and write all the contents from the pinout.

Follow the instructions in the operating manuals.

PSA HYBRID4 HV17.4

Bench Mode Per Centraline PSA HYBRID4 HV17.4

Full reading of Citroen/Peugeot HYBRID4 ECUs via pinout added. 

The ECU has 2 internal HCUs.

- Reading and writing Micro HCU1 / HCU2

- Reading and writing EEPROM HCU1 / HCU2

- Recovery

- Checksum

Boot Mode (BAM) for EMS S8 e CRD2

We have added new BOOT MODE (BAM) for complete control unit management on SCANIA:

- CONTINENTAL EMS S8

and new BOOT MODE (BAM) for MERCEDES BENZ / FCA with control units:

- DELPHI CRD2.xx (Versioni SOLENOID e PIEZOTEC)

This makes reading and writing ECU in open mode easier compared to the previous JTAG mode (JTAG function still available). Furthermore, with this method, it's no longer necessary for Delphi CRD2.xx SOLENOIDs to open the ECU from the underside.

- Reading Micro + Eeprom

- Writing Micro + Eeprom

- Recovery

- Checksum

New Automatic Function: Tricore Clone

Added automatism to clone the following control units with OTP zone adaptation and password:

- BMW MEVD17.2.8

- BMW MEVD17.2.H

- FIAT DCU17 PC42

- MERCEDES BENZ EDC17 CP10

- MERCEDES DCU17 PC42

- MINI MEVD17.2.8

- MINI MEVD17.2.H

- RENAULT DCU17 PC42

- VOLVO EDC17 CP48

Continental GPEC2, GPEC3, GPEC4, GPEC4LM !

New BOOT MODE (BAM) for ECUs Continental GPEC fitted on vehicles FCA Fiat, Jeep, Chrysler, Dodge:

- Continental GPEC2A

- Continental GPEC3

- Continental GPEC4

- Continental GPEC4LM

- Reading Micro + Eeprom

- Writing Micro + Eeprom

- Recovery

- Checksum

Cummins CM2200 Dodge Chrysler

Added JTAG MODE for control unit Continental Cummins CM2200 for vehicles Dodge And Chrysler.

- Reading

- Writing

- Recovery

- Checksum

New Boot Modes For Delphi DCM7.1 A/B PSA

Boot Mode Solution For Delphi ECU DCM7.1A / DCM7.1B

Added New Boot Mode for micro AURIX TC297 for ECUs DCM7.1A and DCM7.1B mounted on PSA group cars.

- Reading

- Writing

- Recovery

- Checksum

Updates for JTAG - Bench - OBD

- New boot via pinout for Mitsubishi Outlander 2.0 Petrol

- Read and write

- Recovery

- Checksum

Added JTAG mode for Adblue ACM Volvo Trucks Euro 6 control unit

- Read

- Writing

- Recovery

- Checksum

Added to the OBD driver for Marelli 9DF FCA also the VIRTUAL reading, in addition to the real reading already present.

Exclusive! - Full System for Marelli 9GF and 8GSW sw version from 2020

- Full System Marelli 9GF for software version from 2020

- Full System Marelli 8GSW for software version from 2020

Added new full system drivers for Marelli 9GF and Marelli 8GSW control units for versions with software update blocked since 2020. On these control units with updated software was no longer allowed the complete reading of micro and eeprom from pinout.

Is now possible: read and write the complete content without opening the control unit.

- Reading and writing Micro

- Reading and writing EEPROM

- Recovery

- Checksum

www.obd2shop.co.uk

KT200 ECU Programmer + Bench Box Self Test

KT200 ECU Programmer supports ECU maintenance chip tuning, removing DTC codes, OBD/BOOT/BDM/JTAG & multiple protocols. This is a guide on how to do a self-test with KT200 + Bench Box. 

1. Connect KT200 & BENCH BOX to PC.

2. Start KT200 software:

Select driver >> BENCH MODE >> TOOLS BENCH MODE >> TEST for BENCH BOXES >> TEST BENCH BOX V.2 >> INFO

Here you can check the operation notice.

This driver is useful for testing the Bench Box V.2

During the test:

- the relays will be triggered at different speeds.

- the read LED will flash several time

...

Before launching the driver, connect the Bench Box V.2 to the tool and power it through the round jack of the bench box itself or from the round jack of the DFOX tool.

3. OK >> Start Test

KT200 will start reading automatically...

Connect Bench Box without ECU and power it, click "OK".

Wait processing until 100%.

Test End.

Completed.

http://blog.obd2shop.co.uk/kt200-ecu-programmer-bench-box-self-test/

Free Download ECUHELP ECU Bench Tool 3.0.0 & FAQs

Here www.obd2shop.co.uk provide ECUHELP ECU Bench Tool 3.0.0 free download link, 100% work, rest assured download. ECU Bench Tool is a universal bench service tool for reading & writing ECU.

Where to free download ECU Bench Tool:

https://www.mediafire.com/file/vfg2jx5whgtfg9f/Ecuhelp_Setup_3.0.0.zip/file

File name: Ecuhelp setup.3.0.0

Size: 72.47MB

Q: How to get ECU info in software?

A: Input ECU model for search.

eg. BOSCH 0281011982

Q: How to get ECU wiring diagram?

A: Input ECU model for search.

Eg. MED17.5

Q: What's the free download software?

A: ECU Bench Tool allows to free download pcmflash1.20, immo off, kt200, etc.

Q: Can ECU Bench Tool download VR file?

A: Yes, it can support.

Q: How to do powertrain adjustment?

A: Users can upload ECU flash files directly after paying. Need to fill in correct model, engine, year, gearbox, ECU type, etc.

Q: What's ECU service? How to use?

A: ECU service includes DTC delete, dpf/egr remove, immo off, etc. Users can upload ecu flash files directly after paying. Need to fill in correct vehicle type, manufacturer, model, engine, year, gearbox, ECU type, etc.

https://obd2shopcouk.weebly.com/blog/free-download-ecuhelp-ecu-bench-tool-300-faqs

(Fixed) KT200 ECU Programmer can't install the driver

Problem: KT200 ECU programmer can't install the driver, it prompts "Windows encountered a problem installing the drivers for your device", how to solve it?

Solution: You need to disable driver signature enforcement, refer to the video for details.

Common problems and solutions of PCMtuner version 1.27

This article has collected several common problems and solutions for customers using PCMtuner Ecu programmer version 1.27.

Problem 1:

My computer starts reading and writing after updating pcmtuner 1.2.7, and it prompts that the PCMtuner Flash cannot be found (as the picture shows below). What should I do?

Solution:

Please go to the official website(Tuner-box.com) to download PCMtuner Flash.

For detailed installation steps, please refer to the following video:

Problem 2:

My digital certificate has been obtained and placed in the corresponding directory. When I open the software, it keeps prompting me to send the machine code to the tuner box mailbox.

Solution:

Set the default opening mode of the PCMtuner license to PCMtuner Flash as shown below.

Note: Make sure the certificate file name has not been changed by you.

Problem 3:

After opening the PCMtuner flash, my computer is not responding and the software is not responding.

Solution:

Set your "Region" to English as shown in the image below and check the Beta version of Unicode.

If the problem persists, set the display language to English as shown in the image below.

If you are unable to open PCMtuner flash normally after all the above steps, it means that there is something wrong with your computer.

Replace the computer or replace the computer system. If you do not want to operate, you can continue to use the PCMflash software as working software.

For further technical support of the PCMtuner Ecu programmer, follow https://www.obd2shop.co.uk/

Common problems and solutions when using PCMtuner

This article lists some problems and solutions that may occur while using the PCMTuner ECU programmer.

Problem 1: Go to the official PCMTuner website and get a 419 error.

Solution: Use the Firefox browser instead of Google.

Problem 2: The error shown in the figure below appears when opening the PCMTuner software.

Solution: This is caused by opening more software, restarting or ending pcmtuner in the task manager.

Problem 3: Win7 system prompts the specified file not found error.

Solution: Download and install framework 4.8. Run setup as admin, disable all antivirus and real-time scans.

For more information on PCMtuner, please pay attention to http://blog.obd2shop.co.uk/

Orange 5 Super Pro V1.35 Free Download & Operation Instructions

 Here Obd2shop.co.uk provides the latest 2022 free download link for Orange 5 Super Pro V1.35 full function & V1.36 software. Safe and virus-free, 100% tested!

Where to free download Orange 5 Super Pro:

https://mega.nz/file/6c4nBQJb#StikKVtqZ0ucFEP1WqDkCOlKeI5PwbD7ZslH70rt3ZQ

Size: 1.88G

(Super Pro: 2G, V1.36 software: 60MB)

Orange 5 V1.36 Version:

https://mega.nz/file/eYxhlBKC#ItU2jSjrpBTVZShJU_CIaU0Gvid8tWK4lV25m9Pdang

Size: 214MB

Operation Instruction

1. Before installing Orange 5 Super Pro software, please connect the device to the computer.

2. When the "USB device not found" pop-up window appears, the device driver is not installed.

3. Computer Management >> Device Manager >> Ports(COM&LPT) >> USB Serial Device(COM5) >> Update driver >> Browse my computer for driver software >> Browse >> orange5_SUPER PRO >> Driver >> x32/x64 >> Next

Once the "ORANGE5 USB" is coming out, which means successful.

4. Before opening Orange 5 Super Pro V1.35 software, please connect the chip to be tested.

http://blog.obd2shop.co.uk/orange-5-super-pro-v1-35-free-download-operation-instructions/