Solution: KTAG V7.020 “Internet connection not detected” Grey Icons

Problem: KTAG V7.020 software was failed to identify the device after installation. It prompted “Connexion a internet non detectee: verifiez que vous disposez d'une connexion internet et essayez a nouveau(Internet connection not detected: check that you have an internet connection and try again).” Meanwhile, all icons turned grey.

What’s the problem? Please help me.

Solution

The reason why caused the issue is that the KTAG driver was not installed properly.

1. Check if the KTAG driver was forbidden or deleted by the antivirus program.

2. Reinstall KTAG driver.

3. Wait until the KTAG device is identified, then can open the software.

Hope this can help.

http://blog.obd2shop.co.uk/solution-ktag-v7-020-internet-connection-not-detected-grey-icons/

Solution: KTAG V2.25 Read Mercedes ME9.7 ECU Communication Error

Problem: I was using V2.25 Red PCB KTAG 7.020 to read Mercedes ME9.7 ECU for programming. But it failed and gave a warning: “Communication error with the ECU: control all connections; if the problem persists, send the LOG file to the assistance.”

What’s going on? Can you help me?

Solution

The reason why caused ECU communication error is because of using wrong connection interface. This interface is where to connect with ME9.7 ECM engine computer for writing data.

Original BOSCH ME9.7 ECU should be read by wiring. The wiring diagram can be found in KTAG(please click into blue link).

Updates

Now can you tell your technician to give me diagram to read with ribbon cable, please?

Engineer replied

We can offer the special wiring diagram for customers, but should replace new “help” files into KTAG.

KTAG 2.25 Help Files Free Download

Link: https://share.weiyun.com/5KYeXO5

Password: ztjb7c

(Feel free to contact us if having any download problems)

How to replace KTAG help files?

Video Guides:

1.Right click K-Suite to Find Target.

(Help files default path: C:\KSuite223\help)

2.Selected & unzipped new help files into Help folder.

3.Wait extracting until 100%, done.

Thanks to Obd2shop, the problem was solved!

Article Source: http://blog.obd2shop.co.uk/solution-ktag-v2-25-read-mercedes-me9-7-ecu-communication-error/

V1.21 PCMtuner Free Download, Install & Register User Guide

Here we provide 2022 the latest V1.21 PCMtuner ECU Programmer software free download link & installation guide. 100% tested, safe to download.

Where to free download PCMtuner V1.21 software:

Link: https://share.weiyun.com/7QqH2WLw

Password: irbk5u

* If you have any trouble during download, feel free to contact OBD2shop.

How to Install & use PCMtuner V1.21 Software?

Installation Guide

1.Install PCMTUNER

Unzip “PCM_Setup” package to run the program, install applications >> Accept agreement, Next >> Next >> Next >> Next >> Install

Wait processing until 100%...

Click “Finish” to next step.

2.Install Scanmatik Setup Wizard

Next >> Accept agreement, next >> Next >> Next >> Next >> Install

Wait until processing finished.

Click “Finish” to complete.

3.Install Guardant Drivers

Run “GrdDriver.exe” program, click “Install”.

The driver will finish the installation automatically.

How to Register PCMtuner Account?

1.Open PCM Tuner, click “Yes” to start registration.

2.Fill in details including name, company, email, phone & country, click “Submit”.

3.After registration, remember to send your email to salesman for activation.

User Name: register email

Password: series number

Note: Please DO NOT work with other software. Otherwise, we are not responsible for lock or damaged issue for this reason.

How to Use PCMtuner Software?

PCMtuner Software has 2 parts: PCM tuner & PCM flash.

1.PCM tuner: It’s where users to check wiring diagram.

2.PCM flash: It allows users to read & write ECU. Can run it in PCM tuner or desktop PCMflash icon directly.

PCMtuner ECU Programmer FAQs

http://blog.obd2shop.co.uk/pcmtuner-v1-21-ecu-programmer-for-67-models-master-versionfaqs/

PCMtuner V1.21 ECU Programmer for 67 Models Master Version(FAQs)

2022 latest Mater version PCMtuner V1.21 ECU Programmer supports 67 models to do read & write ECU data, ECU clone, ECU parameter adjustment, ECU maintenance engineering, read ECU maps, checksum correction, etc.

Compare to version 1.20, PCMtuner V1.21 has added 44 new protocols, Bosch ECU read/write protocols without opening the cover. Good news is either V1.2 KTM BENCH or KTM Flash 3 in 1 users can purchase the PCMtuner V1.21 Dongle for upgrade.

Why to get V1.21 PCMtuner?

1.PCMtuner supports 67 models covering Mercedes, VW, Ford, Mazda, Land Rover, Toyota, Lexus, Honda, Nissan, Infinity, Subaru, Kia, Hyundai, Renault, Mitsubishi, etc.

2.PCMtuner is able to read & write ECU data through OBD/ BENCH/ BOOT modes.

3.PCMtuner performs a complete backup of ECU data, easy ECUs clone and power upgrades.

4.PCMtuner supports to read & write gearboxes.

5.PCMtuner V1.21 software allows users to forcibly write(forcibly clone) without verification, forcibly reading and writing unknown ECUs.

6.Professional tuner can free download WinOLS damaos, A2L, map package.

7.PCMtuner supplies VR files for all legal users.

8.Our engineer can provide customers stage1, stage2, stage3, popbangs, gearbox data to adjust LC, sport display, immo off, adblue off, dpf off, dtc off, vmax, swirl off, restoring ECU or TCU factory setting service(paid service). 

9.We has helpdesk for users. Moreover, we can offer users a platform to work with our high level tuners, from whom you may learn a lot.

Features

1. Read and write ECU data.

2. ECU clone.

3. ECU parameter adjustment

4. ECU maintenance engineering

5. Chip turing

6. Read ECU maps

7. Checksum correction

8. Stage1-3, gearbox tuning , LC, sportdisplay , immo off, adblue off, dpf off, dtc off ,vmax ,swirl off

9. Read flash and ep files

10. Powertrain adjustment

11. Support online update

12. VR files  supply 

13. Pinout comewith

14. Helpdesk and tuner account 

15. OBD2 reading

16. Cover-free wielding-free no disassembly data reading, greatly reduce the risk of destroying the ECU, bench mode.

17. Cover-opening data reading, boot mode

What’s in PCMtuner package?

BENCH/BOOT Cable

OBD Cable - 1pc.

Power Adapter - 1pc.

Master Interface - 1pc.

USB cable - 1pc.

Smart Dongle - 1pc.

How to create PCMtuner account?

1.Contact OBD2shop online service to help create PCMtuner account.

2.Log in https://support.vz-performance.com/ to link with your tool.

Note: 

1.All users account must be requested from sellers. 

2.After activation, user name is your register email, password is series number. It’s automatically created.

3.DO NOT work with any other unknown software in case locked.

PCMtuner ECU Programmer FAQs

Q: Where to download PCMtuner V1.21 software?

A: Please contact OBD2shop online service for secure download.

Q: What’s the “VR Files” meaning? Does PCMtuner read access VR file server?

A: That means virtual reading. It’s only one function on PCMtuner.

Q: How to get map or VR files with PCMtuner tool?

A: Log in https://support.vz-performance.com/ to acquire map, VR files & winols damaos.

Q: How to use PCMtuner Software Dongle?

A: Just plug the dongle, no more operations. Gray unselectable options will be workable after upgrade.

Q: Can PCMtuner support online update, helpdesk and tuner account?

A: Yes, all support.

Q: Can PCMtuner support to do online?

A: Yes, it also supports to read & write ECU offline.

Q: Can I work on my map alone?

A: Yes, but it’s with other software.

Q: Can PCMtuner support edc 16 backup directly from the comb?

A: Yes.

Q: Can PCMtuner support to program FCA MJ9DF?

A: Yes.

Q: What’s “Scanmatik 2 Pro” in module 71?

A: It’s a software driver will install automatically. That means PCMtuner can support Scanmatik 2 Pro.

Q: Can PCMtuner read eprom without opening edc16 & sid 804?

A: Module 71/ 53/ 58 need to read ON BENCH, other modules support to read by OBD.

Q: Can PCMtuner support EDC17 CP44? How to read in virtual?

A: It supports VAG 0L TDI(EDC17CP44), 2L TDI(EDC17CP44). The factory will provide a client for check after virtual reading successfully.

www.obd2shop.co.uk