V80 Iprog+ clone eeprom cable pinouts

Need: looking for Iprog+ clone eeprom cable pinouts, because sprog only shows pin numbers.

Actually, the Iprog+ clone software comes with the eeprom cable pinouts.
After installing Iprog+ clone V80 software, click on one menu option, then chip type, then "Description", you will see the wiring diagram (shown as below).

Where to download Iprog+ clone V80 software?
https://share.weiyun.com/5TDLgT0
Password: sppubu

Image of language option: English and Russian

Image of main menu:
As you can see, it has a wide range of capabilities besides eeprom. 
1. Airbag:
Read and erase crash to some cars
Read and erase DTC
Repair CFG
2. Dashboard:
Read km
Write a new km
3. Car Radio & ECU:
Car Radio:
Read and erase info
Reset count
ECU:
Immo OFF
DPF off
4. Eeprom:
Read/ write/ erase eeprom
5. Immo:
Program and copy chips for cars and truck
Unlock keys
Cover Toyota smart keys: reset key prepare
Write a key by immo dump
6. MCU:
Read and write chips
Cover chips Atmel, Fujitsu and microchips Motorola, NEC v850
7. Special functions:
Mile to km
Pincode from dump

Trusted source of Iprog+ Iprog Pro V80 programmer:
https://www.obd2shop.co.uk/wholesale/iprog-plus-odometer-correction-car-key-programming.html

Free download Ksuite 2.53 for Kess 5.017 China clone: test ok

Free download Ksuite 2.53:
https://mega.nz/#!Lol0GCZR!nOeibBrssBZGwzzvHAlNozrMV3VkVWIl9P0zBT6dcIo

Tested:
Kess 5.017 China clone: yes, works great
ktag 7.020 clone: not okay yet

Test reports:
1. Tested this morning 2.53 ok reading audi a3 ppd ...

2. Tested on WIN7 32bit and it's working fine.
I've read with KESS, a MED17.5.5 by OBD and i'll try a BDM read/write with KTAG tomorrow and I'll share my experience.

Question: Access violation error. SW does not work. DLL folder is just 2mb instead of more than 9mb.
Finally. I just put file i c: and all solved. It works for kess. not k-tag at  the moment

http://blog.obd2shop.co.uk/free-download-ksuite-2-53-for-kess-5-017-china-clone-test-ok/

Is Kess v2 clone reliable OBD read/write Edc16U31 Audi B7?

Car model and year: 
Audi B7 1.9 PD TDI 116 Hp EDC16U31 (2005)
Tested Edc16C34 PSa via OBD without any problem.

Purpose: OBD read and Write ECU data

Using: Kess v2 clone

Question: Is it reliable?
Suggestion: Did BDM Backup, test via K-Line / OBD.
So you can back up if the problem is there.

Review 1. EDC16 should be no problem for kess.

Review 2.  No problem with Kess v2 EU -> read/write
Yesterday tried with one of my friend's B6 and read write through OBD no problem.
I use an external battery as a backup for the car's voltage it holds 12,35 - 12,4 volts stable.
After writing waiting about 3 minutes until the start.
Strange this ECU could be set how much success read/write you enable.
First BDM after OBD easy job I think but needs to be careful always

Review 3. today I use Kess V2 read one of my old U31 (it is T5 2.5tdi but unimportant) Kess and Ktag work.

Thanks.

http://blog.obd2shop.co.uk/is-kess-v2-clone-reliable-obd-read-write-edc16u31-audi-b7/

KESS V2 5.017 "EXTERNAL EXCEPION EEFFACE" Solution

Offer the possible reasons and solutions to KESS V2 5.017 error "EXTERNAL EXCEPION EEFFACE".

It is normal for the computer to detect as USB device:

I tried with v2.23, v2.25 and v2.47. All the same error.
I can't replace NXP, but I can try to replace SD card.

See how everyone has suggested how to solve this problem:
Advice 1. Plug it in and uninstall the 'usb device' from the device manager then unplug the device. Install drivers usbdevicedrv that comes with the correct version for your kess/Ktag. Once complete, plug in Kess and allow drivers to install and run ksuite (with internet disabled)

Advice 2. You need to create a new 5.017 SD Card Image by using the "ImageUSB-tool" program.
Remove SD-card from kess
Format SD-card  Fat32
Burn 5.017 img. file to SD-card using imageUSB-tool (everything you need is on MHH forum)
Put SD-card back in to kess.
Works perfect for mine kess!(same problem)

Finally, I discovered the problem.
My friend had ksuite 1.97 installed on his computer and started the software with internet connection.
Possibly this version has damaged something in NXP.
And found out this new AT89C51CC03U NXP:
https://www.obd2shop.co.uk/wholesale/ck-100-141300046-nxp-fix-chip-with-1024-tokens.html

For your information, I'd like to attach New 5.017 SD Card Image free download: 
1). How to do read an SD card for Kess 5.017 or create a new one?
128 MB XOR Key01-13.zip
https://mega.nz/#!kRxTwQxZ!Vw6g3ROBHr9w7aboGEe97UPIbv2ruVOvlLIZaH1HPDY
Zip Password = "kess5017"

Note: Only Kess 5.017 or 5.028, not for 3.099 etc.

2). How to create a new SD card?
Firstly, download WinHex and XorFiles v1.0 http://www.nirsoft.net/utils/xorfiles.html
Insert your Original SD-Card to Cardreader on PC.
Run WinHex, press F9 open Disk, read your SD-card.
Mark 208Bytes = 13 lines from 0x00000270 to 0x0000033F.

Copy 13 lines to a new file.
Open in WinHex my Keyfile “128 MB XOR Key01-13.img”
Search and replace line 1 in your Keyfile with all line1 lines in “128 MB XOR Key01-13.img”
Search and replace line 2 in your Keyfile with all line2 lines in “128 MB XOR Key01-13.img”
….............................
Search and replace line 13 in your Keyfile with all line13 lines in “128 MB XOR Key01-13.img”

Save your new 128 MB XOR Key01-13.img
run XorFiles v1.0
Filename 1: = your original SD-Imagefile
Filename 2: = your new createt “SD128 MB XOR Key01-13.img” (with your 13 lines ;-)
Destination: = any filename for your new uncryptet Imagefile

if you have decrypted the files, you can integrate the decrypted image file with "ImDisk Virtual Disk
Driver" as a virtual drive and save the files to the PC.
Link to ImDisk https://sourceforge.net/projects/imdisk-toolkit/
If you want to use any new SD-Card in your Kess 5017, use Winhex to fill the SD-card with 00.
put SD-card in Kess, power on Kess.
The 13-line KEY = 208 Bytes is x times on the SD.
From 0x000000D0 it is on some empty SD cards.
If you not found search any other line.
It is important that from line 0 always the 13 lines are
13, 26, 39, 52 ..... 4160 ..... 344032 etc.
that is, 0x0001040 is in decimal 4160,
13 rows = 208 bytes,
4160 divided by 208 = 20
Or 53FE0 = decimal 344032
344032 divided by 208 = 1654
that means if you think you have found the key you have to divide the address (decimal) by 208
without anything after a comma.
then the start same Procedure to create a new “SD128 MB XOR Key01-13.img” file with new SDCard
Key.
Format the new SD-card with FAT, copy Files to SD-ard and crypt it with “XorFiles v1.0”

Thanks.

http://blog.obd2shop.co.uk/how-to-solve-kess-v2-5-017-external-excepion-eefface/

How to update fgtech firmware from 0386 to 0475?

Guys if I understand correctly fgtech 0386 or 0475 is the firmware of the micro.e you can do update or change the pcb ???
0386 is ok on SW china,0475 is ok on sw eu....

Reply:
v48 is 100% not possible to use with fw from v53...this is reality because the hw is totally different...if you want to reprogram lpc you can (if you know how on v48) but the functionality from v53 are not available on hw v48

To agree the above option:
Yes, update the firmware to 0475.
fgtech 0475 is more clean and stable, in combination with a rework pcb (Armageddon΄s list, few pages back)!!

Question: Is possible to use 90% of v53 functionality, just jtag not possible because obviously hw is missing.
Answer: But full working OBD, and BDM updated support to v53 is possible.

Question: ok then pcb changes from v48 to v53 / 54. anyone has a picture of 2 pcb ??

Answer: Maybe you don' t understand,
about pcb:
we change the bad components of china v54 pcb with better quality (components).
v48 is different pcb and it can' t be same with v54...
0475 is the firmware-software and cooperates flawlessly with v54 pcb.
photo v54

Question: now I read that it should be done hw rework and downgrade to sw v53.

Answer: v48 it's no longer on the market. only v54.
"simply" rework the components of v54 pcb (hw) and update the firmware from 0386 to 0475 if needed, because sοme sellers (obd2shop.co.uk) have already the fgtech 0475.
of course we need and good luck with these china copies...

Here is the FGTech 0475 PCB (sold at obd2shop.co.uk): 

If you are interested in it, here you can go:
https://www.obd2shop.co.uk/wholesale/euro-0475-version-v54-fgtech-galletto-2-master.html

Thanks.

FGTech Galletto 0475 win7 win10 works with no problem

Users feedback FGTech 0475 works on XP, 7 32/64 bit, win10 no problem.

1. My FGTech works now under Win10
Story went like this:
11th April, 2019 update:
I cannot write the firmware to the LPC2119.
I have erased first, but writ not possible. In Philips flash utility: "cannot communicate with testboard"
in Fash Magic this message: "Operation Failed. (programming - failed to send data to the device)"
or this message: "unable to communicate. (transmit/receive)".
I use Win XP 32bit, but on Win10 64bit i have the same write problem

12th April, 2019 update:
I'm confused ... i have erased the LPC MCU, writing is not possible ... but the FGTech still works (as 0386) ! After ERASE! Is this normal?
PS: i can still read the security too (it is 2 or 3)

13th April, 2019 update:
Just small feedback. I have now successful write the FGTech 0475 firmware.
I have buy new LPC MCU and replace it. Then was possible to write it. Just for info for another mates with the same writing problem.
My FGTech works now under Win10.

2. FGTech Galletto 0475 on Win xp and win7 32bit no problem:
The FGTech Galletto 0475 with 0475 and soft v54, works without problem in a desktop with win 7 32bit.

V54 FGTech 0475 Galletto 2 Master install on Win7 32bit: 



3. FGTech Galletto 0475 win7 64bit: get Crash report
Solution 1:
use fix tool. if not work again, maybe it is microsoft visual issues...
Here is free download link of fix tool:
https://mega.nz/#!cJABgQbD!SlEUD1vM91ovCGuCrHzAT6891t7OKgdkydhDFnB1iCs
No password

Solution 2:
Tried with fw 0386 FGTech Galletto and aes soft, it works in win7 64bit.
(one user's advice, does not represent the author's point of view ) :

The difference between 0386 and 0475:
0386 = june 2012, 0475 = december 2012

Thanks!

http://blog.obd2shop.co.uk/fgtech-galletto-0475-win7-win10-works-with-no-problem/

KTAG 2.25 "Connection not established" solution

KTAG 2.25 got the error " Connection not established", shown as below.

Possible reason:
1) Give 12V power adapter
2) Computer system is incompatible
3) Network connection
4) Software file is destroyed, need to reinstall Solution:
Computer system requirement (OS): better install ksuite on windows XP 32bit，we supply the perfect version for you at:
win xp: https://share.weiyun.com/5VP1mxN pass: 1zkboe

Why the user is supposed to install ksuite on XP pro. take kess V2 fw4.〇36 for example, before install it, you need to install Microsoft C++2〇〇5, if you change another XP system, C++ maybe not 2015 version and lead ksuite fw4,〇36 not successfully installed.
Some user tested ksuite okay on Win 7 32bit
win7: https://share.weiyun.com/59Noy7p pass: 0awk7b
2) Network connection: Do not connect to the network connection, otherwise ksuite may be locked.
3) Reinstall ksuite (Please note: in the CD, there are one video demo for instruction)

obd2shop.co.uk engineer solution:
Please replace the resistance USB UL46 protection chip on Ktag PCB.

Finally, user feedback:
Update ok
I took this usb protection chip off my old ktag board.
Kessv2 now detected on usb
Note: If you have do not have old ktag/kess v2 to replace the UL46 chip, you can contact our customer service to send you the UL46 protection chip.

Thanks.

www.obd2shop.co.uk

Iprog+ clone V76 V77 free download no pass + operation guide

I have an Iprog+ clone and damaged the DVD with software. Can somebody help me with the software?

Iprog+ clone V76 free download
1. on mega
https://mega.nz/#!lB500aYY!7fQobGqzPhokgB-wU4lUzKCES4ugxAFrfRhyb13Wisw
No password

2. on weiyun
https://share.weiyun.com/5FTr7zl
password: fm63a3

Iprog+ clone V77 free download
1. on mega
https://mega.nz/#!Lp0gBabA!ITgGaTD6xIi2NMW5dumebQ901EUpTfWIUS6XWlXLYrw
No password

2. on weiyun
https://share.weiyun.com/5ehngjw
password: q6pmhw

Iprog+ clone V76 operation guide:



OS: WIN7

Iprog+ clone V77 operation guide:

 

OS: WIN7

All of the above Iprog+ clone software links and video links are supplied by www.obd2shop.co.uk. If you have any problem, feel free to PM.

KTMBENCH clone at bench without open it, have good reviews?

I wanna say KTMBENCH is worth to buy, and an increasing number of good reviews for your reference.

KTMBENCH review 1: 
Tonight I tested Volvo edc17cp22. Working well.
I also tested cp48 and cp68, almost same ecu. Also volvo.
But it did not work, looking at pinout for egpt on them I see why.

cp14 works good.
as I can see it reads all except boot area, for recovery purpose.
tested also sid 807 evo in boot. works. 

KTMBENCH review 2: 
KTM READ AND WRITE DUCATO 3.0 2013 EDC 17C52
FAST AND WELL

KTMBENCH review 3: 
Used on edc17c19 no issues

KTMBENCH review 4:
BMW 2010 184hp... ktm bench is good clone tool at bench without open it.

What's the rework needed on the cable?
Cut vkey cable and solder to vecu cable.

I have more ktag cable who working well for reading and writing, can I use it?
Connector db15 don't have 12v+ on output KTM adepter. I reworked power adepter so i can use ktag db15 cable.

I am getting more and more ecu's on my bench which no longer store the information in an eeprom but in the MCU (or in both), I would like to add a programmer to my workshop. Which programmer that can read and write a variety of MCU's used in most car ecu's at the moment (Renesas, ST, Infineon, NEC, ...).

Then, ktm bench is a good choice now, you can search it on obd2shop.co.uk and check the details.

How to read write golf 7 edc17 eeprom(maps) using Ktag and Kess?

Have Golf 7 edc17 to read and write the mod file, how to do with Ktag and Kess?

With Ktag: 
If you want to write your mod file by ktag you must open ecu and connect it on table.

With Kess:
if you want to write your mod file by kess obd, you must have vr file for your ecu, mod it and write by obd with kess.
Even you just read one of memories where the maps are and somebody modified that you can also write with kess.
Just pick your MOD file, then, open this on Kess (Maps place) and choose wirte.
If anything is wrong, the Ksuite will say to you before write (for exemple: wrong checksum).

If you need VR protocol, google search or contact at @ Dolcevita (cartechnology.co.uk).

Thanks.

www.obd2shop.co.uk

Kess v2 Clone on Ford Focus 1.6 TDCI MK3 EDC17C10 CAN ''checksum error'' solution

Car model and ECU type: Ford Focus 1.6 TDCI MK3 EDC17C10 CAN
Using a Chinese Kess v2 Clone

Error: ''checksum error'' every time when reading my ECU.
I updated my DLL files and today I managed to read the ECU without any error's.
But now when I try to check the file with WINOLS or ECU Titanium all I can see is that the file is empty.

This is my original ECU file
https://mega.nz/#!tRwAlICI!k5prEL47-jNbUuzOmZoO2kA6mUlQ7luUMjSu4C2u0Lw

Working solution to empty file 
1. for sure its not empty.

2. Working solution to ''checksum error''
I replaced the DLL's from the attached file.
DLL attachment:
https://mega.nz/#!dRwigQCB!ElPYR8APjcjqzNwkr-W0DtRQUdcih7Vcfo2Ej0pP-X0

Suggestion:
Bought a second one kess v2 5.017 with a red PCB. It works fine.

KTAG ECU programmer EDC 17 PIN OUT

Looking for pinout diagram for k tag?
Read W212 Bluetec EDC17 CP46 bosch ecu

Please look in Ktag 155 protocol: Plug-in 365: EDC17 CP46 IROM TC1797 (for connection instructions).

http://blog.obd2shop.co.uk/ktag-ecu-programmer-edc-17-pin-out/

Difference between MPPS V18 china clone Vs. eu clone

Answer a FAQ: What's the difference between MPPS v18 Chinese and Europe.

1. Vote MPPS V18 China clone:
1). I've got an MPPS v18 china clone. Had it for ages and used it lots. No problems yet.
2). I also use MPPS V18 without any issues.... It's OK...
3). I use china MPPS V18 and work 100%
All of the above 3 pieces of feedbacks from:
https://www.digital-kaos.co.uk/forums/showthread.php/677305-MPPS-V18-EU-CLONE-any-experiences  (Topic: MPPS V18 EU CLONE any
experiences)

2. Vote MPPS V18 eu clone: 
Success...
1). I have eu clone mpps 18 and never had any problem .... (one time i lock an 6O3 but caused by laptop not from mpps...)

I had buy one china 21 mpps and after i use it for ~ 10 times.... guess........... (before buying, i ask the china seller for time bomb, and guess his answer... )

2). I don't know if they have any major difference in how they works, but I feel more safety by using eu clone....(they have different hw)...

Failure......
3). Update for mpps v18 clone But NOT China..... eu clone.....
yesterday I brick an ecu....... read in boot mode flash, micro, eeprom.... all ok
I start one more reading of the flash for compare..... at the half of reading....... no connection with ecu?
the ecu now is dead..... marelli 6o3...... no connection with op-com no hearing of the pump.... a big F on dash...
that is Very sad for me..... i had a big respect for that tool.....
and I don't know if is possible to recover the ecu.....
I Guess not....

To sum up.
The success rate of mpps v18 china clone is equal to the success rate of mpps v18 eu clone.
And mpps v18 china clone is less than 80GBP.

How satisfied are you with mpps v18 or v21?

Experience with mpps v18 & mpps v21 china clone, it's confirmed that it's much benefit to have one.

1.  Mpps v18 is good tool worth having it have some functions kess not have

2. Mpps is a nice tool....
But stay away from v21....
Have timebomb, I used for ~ 10 times, and I was lucky, I don't brick an ecu...
I read one 8f2, try to write back and the tool stop working for good.
the v21 it could not read the flash of a Fiat 6f3,
The v18 read it just fine (the same car)...

3. v21 was a boobytrapped release. Chinese sellers realized this a few weeks after its release and were replacing chips to go back to v18.

MPPS v18 does have some very important functions for me.

I bet the real tool is exceptional.

4. I have MPPS V18 china clone! Have done EDC16U1 more than 20 at this moment with no problem!


5. MPPS v18 clone test reports......
WITH china clone MPPS v18 read write ,iaw59 fiat ,MB edc15c,vw edc15vp/restore after bad chk file/!crafter edc16 -read,iveco edc16 read ,edc16 opel read,but alga 2,4 jtd 2003 -edc16 no read!!!!strange -bmw 320 2000cc year 2001 with bosh edc15c -mpps read only 64 -galleto 256kb.PSG16 opel -read write ok chk correc

Opel Astra H 1.7CDTI 125PS (98002895 Z17DTR DENSO) - R/W OBD(CAN)- ok.
207 edc16c34 Can R/W
ducato edc16c39 RW ok
cosra z10xep bosch med1.1.5 r/w , write in slow only
Astra H Denso Z17DTJ R/W CAN - ok
SEAT ME7.5.10 R/W k-line (cat_off) - ok
Magneti marelli 6F0 full read/write by OBD MPC,Flash EEPROM OK!
Golf 1.6 TDI Siemens Simos Pcr2.1 R/W can (unlock boot mode-ok) - ok
Corsa 1.3cdti marelli mjd6 reads writes ok
OPEL Signum PSG16
2.2CDTI readout as a Zafira.
all OK.

mitsubishi pajero 3.2l did denso 4m41 R/W ok (chinese)
suzuki vitara hdi edc15c2 R/W ok
EDC17C10 PSA boot mode Read OK
Golf TDI EDC17c14
a4 2.5L edc15v obd read and write
1.9SDI EDC15V+ .... generic eeprom OBD K-line R/W-OK Flash OBD K-line R/W-OK
Polo SIMOS 3PE 1.2 12v read/write as generic simens SIM4LE boot mode flash 512kB - OK (catalyst off).
ford edc16c34 2.20 r/w ok
Mazda 6 2.0 MZR-CD 110hp Denso RF8G- OBD R/W - OK
Opel vectra C, PSG16 can, direct conexi?n to pump,read-write-cks, all Ok.
Simos Pcr2.1, obd read-write-cks ok.
mazda cx7 2.2 170 ecu denso dont ok read 4% after error
Lacetti (2008y) 2.0 CDRi EDC16C39 R/W CAN (only map 2Mb) as Captiva = OK
BMW e91 330xd edc16c35 R-W OK China clone
Astra vxr me7.6.2 R/W OK ( do that ecu own risk ! )
Fiat Doblo 1.3 mjet mjd6f3 obd - r/w ok
Range Rover edc17cp11 boot - r/w ok
Corsa D 1.3 CDTI, EDC17C18, 70.0kw,2010, Z13DTE R/W bootmode TriCore™ = OK
GOLF V 1.6 FSI, MED9.5.10, OBD/CAN R/W ( 30 minutes) = OK
Kangoo EDC17C42 bootmode TriCore R/W = OK
Alfa Romeo EDC16C39-5.5 CAN, ok perfect
Eeprom R/W and Flash R/W on VW Golf EDC15P worked perfectly with 70€ V18 from eBay
SID305 BOOT sak1766 read - write Ok
Ford Fusion 1.4 TDCi Siemens Sid 804 R/W OBD CAN = OK
MED17.4 peugeot 207 read write ok
astra h 1.9 tva off OBD and Zafira B 1.9 EGR off OFF ok
simos pcr 2.1 R/W obd ok
Volkswagen Passat 2.0 TDI Siemens PPD 1.X R/W OBD/CAN = OK
Ford Fusion Style 1.6 TDCi Bosch EDC16C34-2 ok
Read written FLESH + MPC + EEPROM fiat marely 6f3, OK through OBD.
Fiat Stilo IAW6JF.P3, through OBD, mpc and eeprom read write for immo-off, all ok.
Linea 2011 Marelli 6F3 read/write OBD Trought K-line,
peugeot 807 ECU DELPHI DCM 3.5 READ OBD OK
Fiat Scudo as (Peugeot 3008) 2.0 HDI Delphi DCM 3.5 R/W OBD/CAN (CRC=OK) = OK
citroen c5 DCM3.5 read write OBD ok, checksum ok
ME7.3.H4 boot mode read /write full OK
Opel cdti 1.7 ecu Denso R/W ok

Suzuki SX4 DDIS 1.9L 120hp, Bosch EDC16C39 2008, can & kline, read & write by obd ok.
opel corsa 1.3jtd MT marelli ecu 6J0 C1,read/write true obd=ok
Audi a4 edc17cp14..read... write obd ok.
NISSAN Q. EDC16CP33 (4A44383842) R/W OBD = OK (CRC-OK).
Jetta 2,0 16v TSi 200cv - MED17.5.2 Tprot10
Read in Boot = OK
made OBD unlock and CKS by MPPS, write boot = OK
tested edc16u1 from T5 2007 1.9tdi AXB 77kw. read write ok over obd on kline.
edc17 vag golf 6 via obd. it took 30min to make the checksum but all ok

Opel Astra H 2010 Z19DTR with Denso MFDX, r/w without a problem

Search "MPPS v18 GOOD OR NOT" at DK forum. you will read more feedback.

Thanks.

Source of MPPS v18 China clone:
http://www.obd2shop.co.uk/wholesale/mpps-v18-main-tricore-multiboot.html

Iprog+ V76 read write chips of Atmel, Fujitsu & microchips, Motorola, Motorola 912EN etc

Using Iprog+ V76 ECU programmer for one week, it works fine for reading and writing the chips of Atmel, Fujitsu & microchips, Motorola, Motorola 912EN, NEC v850, etc.

If you have broken CD, here you can free download link
https://mega.nz/#!lB500aYY!7fQobGqzPhokgB-wU4lUzKCES4ugxAFrfRhyb13Wisw
Password: No need
Uploaded by Laurance from obd2shop.co.uk

Iprog+ V76 driver update first:
Open the CD.
Click on "7z1900-32bit" to install (because I am sure my computer is 32BIT).

Copy to " iProg+_2019_00001" to the desktop.
Right click on " iProg+_2019_00001", choose "7-zip" to extract.

It prompts one message "Device (iProg+) driver software was not successfully installed".
Right click on "Computer" -> "Manage" -> "Device Manager", right click on "iProg universal programmer" and choose "Update Driver software".
Choose "Browse my computer for driver software"
Select the "Driver" folder".
Click on "Install this driver software".
Driver software was successfully updated.

Open Iprog+ V76 software, has many functions menu.

Click on "MCU", have options: Atmel, Fujitsu, and microchips, Motorola, Motorola 912EN, NEC v850.

Atmel:
Atmega 32
Atmega 8
Atmel Autodetect
Atmel Autodetect2
ATtiny2313
ATtiny26
ATtiny4313
ATtiny45

Fujitsu:
MB90F035
MB90XXX
MB91F0XX
MB91FXXX
MB91FXXX-II
MB95F1XX
MB96XXX

Microchip:
PIC12F
PIC16F
PIC18F
PIC24FJ

Motorola:
908
912
9S08
9S12G
9S12XE
9S12XS
9S12XX
MC68HC05
MC68HC11

Motorola912EN
912
9S12A
9S12C
9S12D
9S12E
9S12G
9S12H
9S12HA
9S12HY
9S12HZ
9
S12P
9S12X
9S12XHY
9S12XS

NECv850:
1725
1797
V850E
V850ES
V850ES Fx3
V850ES Fx3-N
V850_SAM_Mers_Sprinter

Highly recommend, Iprog+ V76 ECU programmer.