How to update fgtech firmware from 0386 to 0475?

Guys if I understand correctly fgtech 0386 or 0475 is the firmware of the micro.e you can do update or change the pcb ???
0386 is ok on SW china,0475 is ok on sw eu....

Reply:
v48 is 100% not possible to use with fw from v53...this is reality because the hw is totally different...if you want to reprogram lpc you can (if you know how on v48) but the functionality from v53 are not available on hw v48

To agree the above option:
Yes, update the firmware to 0475.
fgtech 0475 is more clean and stable, in combination with a rework pcb (Armageddon΄s list, few pages back)!!

Question: Is possible to use 90% of v53 functionality, just jtag not possible because obviously hw is missing.
Answer: But full working OBD, and BDM updated support to v53 is possible.

Question: ok then pcb changes from v48 to v53 / 54. anyone has a picture of 2 pcb ??

Answer: Maybe you don' t understand,
about pcb:
we change the bad components of china v54 pcb with better quality (components).
v48 is different pcb and it can' t be same with v54...
0475 is the firmware-software and cooperates flawlessly with v54 pcb.
photo v54

Question: now I read that it should be done hw rework and downgrade to sw v53.

Answer: v48 it's no longer on the market. only v54.
"simply" rework the components of v54 pcb (hw) and update the firmware from 0386 to 0475 if needed, because sοme sellers (obd2shop.co.uk) have already the fgtech 0475.
of course we need and good luck with these china copies...

Here is the FGTech 0475 PCB (sold at obd2shop.co.uk): 

If you are interested in it, here you can go:
https://www.obd2shop.co.uk/wholesale/euro-0475-version-v54-fgtech-galletto-2-master.html

Thanks.

FGTech Galletto 0475 win7 win10 works with no problem

Users feedback FGTech 0475 works on XP, 7 32/64 bit, win10 no problem.

1. My FGTech works now under Win10
Story went like this:
11th April, 2019 update:
I cannot write the firmware to the LPC2119.
I have erased first, but writ not possible. In Philips flash utility: "cannot communicate with testboard"
in Fash Magic this message: "Operation Failed. (programming - failed to send data to the device)"
or this message: "unable to communicate. (transmit/receive)".
I use Win XP 32bit, but on Win10 64bit i have the same write problem

12th April, 2019 update:
I'm confused ... i have erased the LPC MCU, writing is not possible ... but the FGTech still works (as 0386) ! After ERASE! Is this normal?
PS: i can still read the security too (it is 2 or 3)

13th April, 2019 update:
Just small feedback. I have now successful write the FGTech 0475 firmware.
I have buy new LPC MCU and replace it. Then was possible to write it. Just for info for another mates with the same writing problem.
My FGTech works now under Win10.

2. FGTech Galletto 0475 on Win xp and win7 32bit no problem:
The FGTech Galletto 0475 with 0475 and soft v54, works without problem in a desktop with win 7 32bit.

V54 FGTech 0475 Galletto 2 Master install on Win7 32bit: 



3. FGTech Galletto 0475 win7 64bit: get Crash report
Solution 1:
use fix tool. if not work again, maybe it is microsoft visual issues...
Here is free download link of fix tool:
https://mega.nz/#!cJABgQbD!SlEUD1vM91ovCGuCrHzAT6891t7OKgdkydhDFnB1iCs
No password

Solution 2:
Tried with fw 0386 FGTech Galletto and aes soft, it works in win7 64bit.
(one user's advice, does not represent the author's point of view ) :

The difference between 0386 and 0475:
0386 = june 2012, 0475 = december 2012

Thanks!

http://blog.obd2shop.co.uk/fgtech-galletto-0475-win7-win10-works-with-no-problem/

KTAG 2.25 "Connection not established" solution

KTAG 2.25 got the error " Connection not established", shown as below.

Possible reason:
1) Give 12V power adapter
2) Computer system is incompatible
3) Network connection
4) Software file is destroyed, need to reinstall Solution:
Computer system requirement (OS): better install ksuite on windows XP 32bit，we supply the perfect version for you at:
win xp: https://share.weiyun.com/5VP1mxN pass: 1zkboe

Why the user is supposed to install ksuite on XP pro. take kess V2 fw4.〇36 for example, before install it, you need to install Microsoft C++2〇〇5, if you change another XP system, C++ maybe not 2015 version and lead ksuite fw4,〇36 not successfully installed.
Some user tested ksuite okay on Win 7 32bit
win7: https://share.weiyun.com/59Noy7p pass: 0awk7b
2) Network connection: Do not connect to the network connection, otherwise ksuite may be locked.
3) Reinstall ksuite (Please note: in the CD, there are one video demo for instruction)

obd2shop.co.uk engineer solution:
Please replace the resistance USB UL46 protection chip on Ktag PCB.

Finally, user feedback:
Update ok
I took this usb protection chip off my old ktag board.
Kessv2 now detected on usb
Note: If you have do not have old ktag/kess v2 to replace the UL46 chip, you can contact our customer service to send you the UL46 protection chip.

Thanks.

www.obd2shop.co.uk

Iprog+ clone V76 V77 free download no pass + operation guide

I have an Iprog+ clone and damaged the DVD with software. Can somebody help me with the software?

Iprog+ clone V76 free download
1. on mega
https://mega.nz/#!lB500aYY!7fQobGqzPhokgB-wU4lUzKCES4ugxAFrfRhyb13Wisw
No password

2. on weiyun
https://share.weiyun.com/5FTr7zl
password: fm63a3

Iprog+ clone V77 free download
1. on mega
https://mega.nz/#!Lp0gBabA!ITgGaTD6xIi2NMW5dumebQ901EUpTfWIUS6XWlXLYrw
No password

2. on weiyun
https://share.weiyun.com/5ehngjw
password: q6pmhw

Iprog+ clone V76 operation guide:



OS: WIN7

Iprog+ clone V77 operation guide:

 

OS: WIN7

All of the above Iprog+ clone software links and video links are supplied by www.obd2shop.co.uk. If you have any problem, feel free to PM.

KTMBENCH clone at bench without open it, have good reviews?

I wanna say KTMBENCH is worth to buy, and an increasing number of good reviews for your reference.

KTMBENCH review 1: 
Tonight I tested Volvo edc17cp22. Working well.
I also tested cp48 and cp68, almost same ecu. Also volvo.
But it did not work, looking at pinout for egpt on them I see why.

cp14 works good.
as I can see it reads all except boot area, for recovery purpose.
tested also sid 807 evo in boot. works. 

KTMBENCH review 2: 
KTM READ AND WRITE DUCATO 3.0 2013 EDC 17C52
FAST AND WELL

KTMBENCH review 3: 
Used on edc17c19 no issues

KTMBENCH review 4:
BMW 2010 184hp... ktm bench is good clone tool at bench without open it.

What's the rework needed on the cable?
Cut vkey cable and solder to vecu cable.

I have more ktag cable who working well for reading and writing, can I use it?
Connector db15 don't have 12v+ on output KTM adepter. I reworked power adepter so i can use ktag db15 cable.

I am getting more and more ecu's on my bench which no longer store the information in an eeprom but in the MCU (or in both), I would like to add a programmer to my workshop. Which programmer that can read and write a variety of MCU's used in most car ecu's at the moment (Renesas, ST, Infineon, NEC, ...).

Then, ktm bench is a good choice now, you can search it on obd2shop.co.uk and check the details.

How to read write golf 7 edc17 eeprom(maps) using Ktag and Kess?

Have Golf 7 edc17 to read and write the mod file, how to do with Ktag and Kess?

With Ktag: 
If you want to write your mod file by ktag you must open ecu and connect it on table.

With Kess:
if you want to write your mod file by kess obd, you must have vr file for your ecu, mod it and write by obd with kess.
Even you just read one of memories where the maps are and somebody modified that you can also write with kess.
Just pick your MOD file, then, open this on Kess (Maps place) and choose wirte.
If anything is wrong, the Ksuite will say to you before write (for exemple: wrong checksum).

If you need VR protocol, google search or contact at @ Dolcevita (cartechnology.co.uk).

Thanks.

www.obd2shop.co.uk

Kess v2 Clone on Ford Focus 1.6 TDCI MK3 EDC17C10 CAN ''checksum error'' solution

Car model and ECU type: Ford Focus 1.6 TDCI MK3 EDC17C10 CAN
Using a Chinese Kess v2 Clone

Error: ''checksum error'' every time when reading my ECU.
I updated my DLL files and today I managed to read the ECU without any error's.
But now when I try to check the file with WINOLS or ECU Titanium all I can see is that the file is empty.

This is my original ECU file
https://mega.nz/#!tRwAlICI!k5prEL47-jNbUuzOmZoO2kA6mUlQ7luUMjSu4C2u0Lw

Working solution to empty file 
1. for sure its not empty.

2. Working solution to ''checksum error''
I replaced the DLL's from the attached file.
DLL attachment:
https://mega.nz/#!dRwigQCB!ElPYR8APjcjqzNwkr-W0DtRQUdcih7Vcfo2Ej0pP-X0

Suggestion:
Bought a second one kess v2 5.017 with a red PCB. It works fine.