Alientech KESS V3 2025 Sale: Save 50% + FREE Protocols Until 16th!

Hurry! Only 6 Days Left Until June 16th! Don’t miss this exclusive Alientech KESS V3 2025 promotion - perfect for new users! Enjoy massive discounts on powerful ECU tuning tools designed for cars, trucks, tractors, and buses for a limited time. Whether you’re a professional tuner or a DIY enthusiast, this is your chance to upgrade at unbeatable prices.

Hot Deals You Can't Ignore

Why Choose Alientech KESS V3?

✅ High-Performance Tuning - Optimize engine performance for a wide range of vehicles.

✅ User-Friendly - Perfect for both professionals and beginners.

✅ Exclusive Free Bonuses - Get BENCH/BOOT protocols at no extra cost!

✅ Limited-Time Savings - Prices this low won’t last!

Act Fast - Promotion Ends Soon!

This offer expires on June 16th, 2025. Don’t wait - secure your Alientech KESS V3 today and start tuning with premium features at a fraction of the cost!

Shop Now: www.obd2shop.co.uk

New OBD Protocol Update: Alientech KESS V3 Add VAG MD1CS004

Alientech's new OBD Protocol Update is Direct OBD VR Reading & Writing for Faster, Easier Operations on the KESS V3 ECU Programmer.

The latest update enables direct VR reading and writing via OBD on supported ECUs, streamlining your workflow for greater efficiency.

Important Note:

MD1CS004 ECUs with hardware H80 can only be accessed via OBD - bench mode is not supported for these units.

Check Compatibility & Unlock OBD Protocol Capabilities:

AUDI - 2.0L TDI EU6

CUPRA - 2.0L TDI EU6

SEAT - 2.0L TDI EU6

SKODA - 2.0L TDI EU6

VOLKSWAGEN - 2.0L TDI EU6

Expanded Protocol Coverage & VR File Library

AlienTech has broadened support for more ECU versions and enhanced the VR file library to assist your operations. While many VR files are already available (ready for immediate use), we cannot guarantee coverage for every case.

The new OBD protocol for Bosch MD1CS004 enables workshops to efficiently service vehicles from 2019 to 2025, unlocking new opportunities on the latest models.

www.obd2shop.co.uk

PadFlash Tool Software Installation Guide (Windows System)

This detailed walkthrough will teach you how to install and set up the PadFlash Programmer Software on Windows seamlessly.

I. System Requirements & Preparations

Recommended OS: Windows 7 64-bit (for optimal compatibility)

II. Software & Driver Downloads

1. Access the Official Website

Visit https://www.padflashr.uk/

2. Download Drivers

On the download page, provide:

Email address

Tool Serial Number (SN)

Click "Download" to obtain drivers.

3. Download the PadFlash Updater Tool

On the download page, provide:

Email address

Phone number

Click "Download" to get the Updater tool

III. Software Installation & Registration

1. Install PadFlash Updater

Run the downloaded installer and follow the default setup steps.

A desktop shortcut named PadflashUpdater Setup will be created.

2. Register Your Account

Launch the Updater via the desktop shortcut.

Enter the following details to register:

Email address

Tool Serial Number (SN)

3. Initialize Updates

Restart the PadFlash Updater.

Click Download Update Files and wait for completion.

Critical Step: After the download, restart the Updater 3 times.

IV. Hardware Driver Installation

1. Install Dongle Driver

Insert the dongle into a USB port.

Allow the system to detect it, then install the driver automatically.

2. Install Tool Drivers

Connect the PadFlash tool to your PC via USB.

Install the drivers in this order

V. Software Activation & Usage

1. Activate Tool License

Launch the PadFlash software and click Active.

Enter the tool serial number in UPPERCASE letters.

2. Firmware Update Workflow

Before closing the software:

Click Activate the FW to update the tool’s firmware.

Exiting the software triggers a full firmware upgrade. Repeat this step every time you close the software.

VI. Important Notes

1. Ensure the serial number is entered in UPPERCASE (copy-paste recommended).

2. Do NOT disconnect the tool or dongle during updates.

3. If driver installation fails, run the installer as Administrator.

4. Temporarily disable antivirus/firewall to avoid false positives.

By following these steps, you have completed the setup of the PadFlash tool. For technical support, contact www.obd2shop.co.uk.

Comparison of PADFLASH, Foxflash, and Other Tools

When choosing a tool for ECU tuning and cloning, it's important to understand each option's strengths and limitations. In this article, we'll compare PADFLASH, Foxflash, and Other Tools based on their different features to help you make an informed decision.

1. TCU Support

PADFLASH: Offers average support for TCU (Transmission Control Unit).

Foxflash: Provides strong support for TCU.

Other Tools: Only some tools offer TCU support.

2. BENCH Support

PADFLASH: Yes.

Foxflash: Yes.

Other Tools: Only some tools support BENCH operations.

3. Supported Vehicle Types

PADFLASH: Supports a wide range including cars, trucks, tractors, marine vehicles, and bikes.

Foxflash: Also supports cars, trucks, tractors, marine vehicles, and bikes.

Other Tools: Typically support cars, trucks, or bikes but may not cover all vehicle types.

4. Subscription Fees

PADFLASH: No subscription fees.

Foxflash: No subscription fees.

Other Tools: Some tools require a subscription fee, around $600 per year, while others do not.

5. Dongle Requirement

PADFLASH: Requires a dongle.

Foxflash: Does not require a dongle.

Other Tools: Some tools come with a dongle, while others do not.

6. Read Methods

PADFLASH: Supports multiple methods including BENCH, OBD, full connection, BOOT, JTAG, and BDM.

Foxflash: Also supports BENCH, OBD, full connection, BOOT, JTAG, and BDM.

Other Tools: Some tools partially support these methods.

7. Virtual Read

PADFLASH: Yes.

Foxflash: Yes.

Other Tools: Some tools support virtual read, while others do not.

8. Internet Connection

PADFLASH: Requires an internet connection.

Foxflash: Requires an internet connection.

Other Tools: Also require an internet connection.

9. Special Features

EMS2.4: Supported by PADFLASH but not by Foxflash. Some other tools support it.

SID6 SIDS: Supported by PADFLASH but not by Foxflash. Some other tools support it.

MD1CS018 MG1CA811: Supported by PADFLASH but not by Foxflash. Some other tools support it.

10. Cloning Capabilities

PSG16 CLONE: PADFLASH can clone via BENCH read, while Foxflash cannot clone via OBD read.

M10JA: PADFLASH can clone via BENCH read, while Foxflash cannot clone via OBD, BOOT, or OTB.

PSG16: PADFLASH uses BENCH, Foxflash uses OBD.

11. Order Options

PADFLASH: Can be ordered separately.

Foxflash: Only available as a full version.

Other Tools: Some tools offer separate ordering options, while others do not.

12. Languages Supported

PADFLASH: Supports 16 languages.

Foxflash: Supports fewer than 16 languages.

Other Tools: Typically support about 6 languages.

13. Speed Modification

PADFLASH: Partially supports speed modification.

Foxflash: Does not support speed modification.

Other Tools: Some tools support speed modification, while others do not.

14. Counter Reset

PADFLASH: Supports counter reset.

Foxflash: Does not support counter reset.

Other Tools: Some tools support counter reset, while others do not.

Conclusion

If you need a tool that allows cloning without opening the ECU, PADFLASH is a better choice due to its comprehensive support and flexibility. Foxflash excels in TCU support and offers a robust full version without the need for a dongle. Other tools vary widely in their capabilities and may require additional fees or have limited support.

Choosing the right tool depends on your specific needs, such as the types of vehicles you work with and the features you require.

www.obd2shop.co.uk