foxFlash 25.02 Update protocols for Porsche PDK

Good news!! foxFlash 25.02 update protocols for Porsche PDK and now you can easily read and write Porsche PDK gearbox!

Supported Control Units & Vehicles:

BOOT

Porsche 911.2 Siemens PDK4000

Porsche 918 Siemens PDK3000

Porsche 918 Siemens PDK4000

Porsche Boxster 718 Siemens PDK3000

Porsche Boxster 981 Siemens PDK4000

Porsche Carrera 991 Siemens PDK3000

Porsche Carrera 991 Siemens PDK4000

Porsche Cayman Siemens PDK4000

Porsche Macan Siemens PDK3000

Porsche Macan Siemens PDK4000

Porsche Panamera Siemens PDK3000

Porsche Panamera Siemens PDK4000

Update method: run the foxFlash manager, and click the download button till everything is done.

How to Clone Tricore ECU with FoxFlash/KT200 Tool?

FoxFlash & KT200 Programmer can support cloning ECU function as OBDSTAR DC706. This is an introduction on how to clone Tricore ECU with new KT200 software step by step. The procedure may apply to FoxFlash software as well.

Step1. Read ECU data via "BOOT MODE TRICORE" or "BENCH TRICORE" option. Including Micro FLASH, EEPROM data from original ECU & new ECU.

Step2. Select Menu >> Select Drive >> TOOL BOOT >> TOOLS BOOT MODE - INFINEON TRICORE Clone Service >> ECU Model

Step3. Fill 1st option with original ECU Micro file, fill 2nd option with new ECU Micro file.

Step4. Click "CLONE & SAVE" to save new ECU file.

Step5. Select BOOT MODE >> INFINION TRICORE Boot >> ECU Model >> Load new ECU file >> Write to new ECU

* BENCH TRICORE may cause incomplete writing of ECU data(Boot is recommended)

Attention

1. Please write the original EEPROM to new ECU with no changes;

2. Please write Micro FLASH & EEPROM data separately, CANNOT read & write together;

3. If the Micro FLASH data cannot be written, it needs to be processed manually with winols. Or asking help for a professional engineer.

4. Nonsupport VW 5th generation IMMO system.

Technical Support

www.obd2shop.co.uk