V80 Iprog+ clone eeprom cable pinouts

Need: looking for Iprog+ clone eeprom cable pinouts, because sprog only shows pin numbers.

Actually, the Iprog+ clone software comes with the eeprom cable pinouts.
After installing Iprog+ clone V80 software, click on one menu option, then chip type, then "Description", you will see the wiring diagram (shown as below).

Where to download Iprog+ clone V80 software?
https://share.weiyun.com/5TDLgT0
Password: sppubu

Image of language option: English and Russian

Image of main menu:
As you can see, it has a wide range of capabilities besides eeprom. 
1. Airbag:
Read and erase crash to some cars
Read and erase DTC
Repair CFG
2. Dashboard:
Read km
Write a new km
3. Car Radio & ECU:
Car Radio:
Read and erase info
Reset count
ECU:
Immo OFF
DPF off
4. Eeprom:
Read/ write/ erase eeprom
5. Immo:
Program and copy chips for cars and truck
Unlock keys
Cover Toyota smart keys: reset key prepare
Write a key by immo dump
6. MCU:
Read and write chips
Cover chips Atmel, Fujitsu and microchips Motorola, NEC v850
7. Special functions:
Mile to km
Pincode from dump

Trusted source of Iprog+ Iprog Pro V80 programmer:
https://www.obd2shop.co.uk/wholesale/iprog-plus-odometer-correction-car-key-programming.html

Free download Ksuite 2.53 for Kess 5.017 China clone: test ok

Free download Ksuite 2.53:
https://mega.nz/#!Lol0GCZR!nOeibBrssBZGwzzvHAlNozrMV3VkVWIl9P0zBT6dcIo

Tested:
Kess 5.017 China clone: yes, works great
ktag 7.020 clone: not okay yet

Test reports:
1. Tested this morning 2.53 ok reading audi a3 ppd ...

2. Tested on WIN7 32bit and it's working fine.
I've read with KESS, a MED17.5.5 by OBD and i'll try a BDM read/write with KTAG tomorrow and I'll share my experience.

Question: Access violation error. SW does not work. DLL folder is just 2mb instead of more than 9mb.
Finally. I just put file i c: and all solved. It works for kess. not k-tag at  the moment

http://blog.obd2shop.co.uk/free-download-ksuite-2-53-for-kess-5-017-china-clone-test-ok/

Is Kess v2 clone reliable OBD read/write Edc16U31 Audi B7?

Car model and year: 
Audi B7 1.9 PD TDI 116 Hp EDC16U31 (2005)
Tested Edc16C34 PSa via OBD without any problem.

Purpose: OBD read and Write ECU data

Using: Kess v2 clone

Question: Is it reliable?
Suggestion: Did BDM Backup, test via K-Line / OBD.
So you can back up if the problem is there.

Review 1. EDC16 should be no problem for kess.

Review 2.  No problem with Kess v2 EU -> read/write
Yesterday tried with one of my friend's B6 and read write through OBD no problem.
I use an external battery as a backup for the car's voltage it holds 12,35 - 12,4 volts stable.
After writing waiting about 3 minutes until the start.
Strange this ECU could be set how much success read/write you enable.
First BDM after OBD easy job I think but needs to be careful always

Review 3. today I use Kess V2 read one of my old U31 (it is T5 2.5tdi but unimportant) Kess and Ktag work.

Thanks.

http://blog.obd2shop.co.uk/is-kess-v2-clone-reliable-obd-read-write-edc16u31-audi-b7/